Универсальный пульт ДУ PHILIPS SRU1018. Инструкция на русском языке

SRU 1018
GB  Instructions for use    4
FR  Mode d'emploi           8
DE  Bedienungsanleitung    12
NL  Gebruiksaanwijzing     16
DK  Vejledning             20
SV  Bruksanvisning         24
NO  Bruksanvisning          28
SF  Kayttoohje             32
IT  Instruzioni per l'uso  36
ES  Instrucciones de manejo  40
PR  Manual de utilizacao   44
GR  Od
 	         48
RU  Инструкции по использованию  52
CZ  Navod k pouziti        56
PL  Instrukcja obslugi     60
Quick, Clean & Easy Setup
www.philips.com/urc

4   ENGLISH
Contents
1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
2.  Installing the remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-6
3.  Keys and functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
4.  Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Code list of all brands / equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64-68
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
1. Introduction
Congratulations on your purchase of the Philips SRU 1018 universal remote control.
The SRU 1018 is a handy zapper with all main keys and ergonomic shape for comfortable control.
After installing the remote control it can operate the most-used functions of almost any brand of TV.
You can find information about how to prepare this remote control for use in the chapter
‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1  Press the cover inwards and lift it up.
2  Place two R03, UM4 or AAA type batteries into the battery compartment,
as shown.
3  Replace the cover and click it firmly into place.
Testing the remote control
Because the SRU 1018 may use different signals for each brand and even for different models of the same
brand, it is advisable to test whether your TV responds to the SRU 1018.
The example below instructs you how to do this.
1  Turn your TV on manually or use the original remote control.Tune to channel 1.
2  Check whether all the keys are working.
For an overview of the keys and their functions see ‘3. Keys and functions’.
–  If the TV responds as it should to all of the key commands the SRU 1018 is
ready for use.
•  If the device does not respond at all or not to all of the key
commands, follow the instructions under ‘Setting the remote control’ or for online setup got
to: www.philips.com/urc.

ENGLISH   5
Setting the remote control
This is only necessary if your TV does not respond to the SRU 1018. If that is the case, the SRU 1018 does
not recognize the brand and/or model of your TV and you need to program the remote control to do so.
The example below instructs you how to do this.You can set the remote control either manually or
automatically.
Manually setting the remote control
1  Turn on the TV manually or use the original remote control.Tune in to channel 1.
2  Look up the brand of your TV in the code list at the back of this manual.
One or more 3-figure key codes are shown for each brand.
Note the first code.
On our website www.philips.com/urc you can directly select your device
typenumber to find the right code.
Make sure you use the codes from the correct table.
3  Keep keys 1 and 3 on the SRU 1018 pressed simultaneously for
five seconds until the indicator light remains lit.
4  Then enter the code noted in step 2 using the code keys.
–  The indicator light will now flash twice. If the indicator light flashes once for
an extended period, the code has not been entered properly or the wrong
code has been entered. Start again from step 2.
5  Point the SRU 1018 at the TV and check that it responds as it should.
–  If the TV responds to all of the key commands, the SRU 1018 is ready for use.
Do not forget to note your code.
•  If the device does not respond at all, or not to all of the key commands, start again from
step 2 and try the next code from the list.