Магнитола TELEFUNKEN TF-CSRP3481. Инструкция на русском языке

СТЕРЕОМАГНИТОЛА С CD
CD RADIO PLAYER
TF-СSRP3481
Instruction manual
Руководство по
эксплуатации

Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
1.  FUNCTION switch                 1       2        3    4     5
2.  Display
3.  OPEN/CLOSE button
4.  Handle
5.  Telescopic FM antenna
6.  Phones jack
7.  VOLUME regulator
8.  FOLDER button
9.     button
10.    button
11.   button
12.   CD/USB button
13. PLAY MODE button
14. TUNING regulator
15. AUX input
16. USB port
Not indicated: Battery compartment (bottom),  6 7 8 9 10 11 12 13  14  15  16
power cord socket (back panel)
Utilization of the product          Important safeguards
If you want to dispose this product, do not   •  Attention: The Instruction manual
mix it with general household waste. There is a   contains important operating and maintenance
separate collection system for used electronic   instructions. For your safety, it is necessary to
products in accordance with legislation that   refer to the manual.
requires proper treatment, recovery and   •  Dangerous voltage: Uninsulated
recycling.                          dangerous voltage that may be of sufficient
Please contact your local authorities for   magnitude to constitute a risk of electrical
the correct method of disposal. By doing so,   shock to persons is present within this product
you will ensure that your disposed product   enclosure.
undergoes the necessary treatment, recovery   •  Caution: To reduce the risk of electric
and recycling and thus prevent potential   shock, do not dismantle the body. Prefer
negative effects on the environment and   servicing to qualified service personnel. Do not
human health.                       use the unit in places where it can be exposed
2

Instruction manual
to water, moisture and dust. Make sure that   through the amplifier of this unit.
pins or other foreign objects do not get inside   •  To connect an external audio device (eg.
the unit; they may cause malfunctions, or   MP3 player), please use a standard stereo
create safety hazards such as electrical shock.  cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
Power supply                       socket of this unit.
•  Slide FUNCTION switch to AUX IN position.
•  Turn on the external device.
Battery operation
•  Open the battery compartment cover.
•  Insert 8 x UM-2/LR14 “C” size batteries.   Headphone jack
Please observe correct battery polarities or the
set will not work.
•  Close the battery compartment cover.   •  For private listening, insert 3.5-mm
headphone into the stereo headphone jack.
•  Adjust volume to the appropriate level as
AC operation                       desired.
•  Before the first connecting of the appliance
•  When the stereo headphone jack is
check that voltage indicated on the rating label   plugged, speaker will disconnect automatically.
corresponds to the mains voltage in your home.
•  Plug the corresponding end of cord into
the AC socket on the rear of the set.  Clock operations
•  Insert the plug into power supply.
Caution:                            •  Set FUNCTION switch to AUX/OFF position.
•  When the set is only used with AC or is   •  Press PLAY MODE button. The hour
not used for 2 weeks or more, please remove   setting will flash. Use   /   buttons to change
the batteries, to avoid damage to the set from   the hour.
leakage of batteries.                •  Press PLAY MODE button again. The
•  Always switch off the unit when not in use.  minute setting will flash. Use   /   buttons to
•  Always unplug the appliance from power   change the minutes.
supply, when no use long time.       •  Press PLAY MODE button once more to
save changes.
General operations                  Radio operations
•  To select the needed sound source set   •  Set FUNCTION switch to AM or FM position.
FUNCTION switch to the corresponding   •  Rotate TUNING regulator to tune to the
position (CD/USB/AUX IN/FM/AM).     desired station.
•  Adjust the sound volume level by rotating   •  To turn off the radio, set FUNCTION
VOLUME regulator.                   switch to a different position.
Antenna
AUX in jack                         •  For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
You can connect the audio output of an
external device (such as a CD-player) to   •  The AM signal is picked up through the
this unit, to listen to the sound of that device   built-in antenna. The set should be placed to a
position for the best reception.
3