Звуковая панель SONY HT-CT390. Инструкция на русском языке

Supplied accessories
4 Turning on the system
4-586-112-71(1)
Sound Bar
Remote control (1)   R03 (size AAA) batteries (2)  Optical digital cable (1)
Startup Guide
?
Wall mounting brackets (2)   Speaker pads for the subwoofer (4)
and screws (2)       Refer to the supplied Operating Instructions on
installing the subwoofer horizontally.
HT-CT390                                                                                                                                                                             ?  Connect the AC power cords (mains leads).
To mount the Bar Speaker on a wall                                   ?  Press ? (power).
Refer to the supplied Operating Instructions.
The top panel display lights up.
When the power indicator of the subwoofer turns green, wireless connection of Bar Speaker and subwoofer is completed. If it does not turn on, the wireless transmission is not activated.
Refer to “No sound is heard from the subwoofer.” of “Troubleshooting” in the supplied Operating Instructions.
Bar Speaker
Subwoofer
5 Listening to the sound
1       Connecting with a TV                                                                                                                                                                                                                                              INPUT
? +/–
Is the HDMI input jack on your TV labeled “ARC” ?                                                                                                                                                                                   SW ? +/–
Press INPUT repeatedly until the device you want appears in the top panel display. Then, press ? +/– repeatedly to adjust the volume of the system and press SW ? +/–
NO                                                                       YES                                                              repeatedly to adjust the volume of the subwoofer.
Setup completed! Enjoy!             Please refer to the supplied Operating Instructions about the sound              Operating Instructions
mode, and other functions.
High Speed                           Optical digital cable (supplied)                        High Speed HDMI cable (not supplied)
HDMI cable (not
supplied)
Listening to music from a BLUETOOTH device
When pairing a BLUETOOTH device                                                          INPUT     PAIRING                BLUETOOTH device
Blue LED indicator
Note                                                                                                                                                              To pair the system with a BLUETOOTH device (Pairing)
Make sure that the HDMI cable is firmly inserted.
?  Place the BLUETOOTH device within 1 meter from the Bar Speaker.
?  Press    PAIRING on the Bar Speaker.
The blue LED indicator on the Bar Speaker flashes quickly (  ) during BLUETOOTH pairing.
? Turn on the BLUETOOTH function, and then select “HT-CT390” after searching for it on the BLUETOOTH device.
Perform this step within 5 minutes, otherwise pairing mode may be canceled. When the BLUETOOTH connection is established, the blue LED indicator lights up ( ).
2 Setting up the remote control                                                                                                                                          If passkey is required on the BLUETOOTH device, enter “0000”.
To listen to music from the paired device
?  Turn the BLUETOOTH function of the paired device to on.
? Press INPUT repeatedly to select “BT”.
The system automatically reconnects to the BLUETOOTH device it was most recently connected to. When the BLUETOOTH connection is established, the blue LED indicator lights up ( ).
? Start playback on the BLUETOOTH device.
? Adjust the volume.
When using One-touch connection (NFC)
3 Turning on the TV                                                                                                                                                                                                                                       Blue LED indicator
?  Hold the remote device near to the N-Mark on the Bar Speaker until the remote device vibrates.
When the BLUETOOTH connection is established, the blue LED indicator on the Bar Speaker lights up ( ).
Power                                                                                              ? Start playback of audio source on the remote device.
•  Compatible remote devices
Remote devices with a built-in NFC function
Input                                                                                                (OS: Android™ 2.3.3 or later, excluding Android 3.x)
SongPal
Change the input of the TV to the input which the Bar Speaker is connected.
A dedicated App for this model is available on both Google Play™ and App Store.
Search for “SongPal” and download the free App to find out more about the convenient features.
© 2016 Sony Corporation  Printed in Malaysia
HT-CT390  4-586-112-71(1)