Динамик ВЧ SCANSPEAK R2904/700000. Инструкция на английском языке

TWEETER                                                   R2904/700000
The Revelator tweeter series consist of the revolutionary ring radiator design, which
put an end to some of the design trade-offs in dome designs. The ring radiator still
offers unrivalled performance. Additional enhancements have been made to reduce
distortion and power compression, such as large neodymium magnet systems for high
sensitivity, and a careful design to optimize airflow in the chambers.
KEY FEATURES:
? 1" Ring Dome Diaphragm                   ? Patented Phase Plug Design
? Patented Symmetrical Drive (SD-2) motor    ? Large Ring Neo Magnet f. High Output
? Non Resonant Alu Rear Chamber            ? Silver Anodized Mashined Alu Face Plate
T-S Parameters                                  Electrical Data
Resonance frequency [fs]       520 Hz           Nominal impedance [Zn]           4 ?
Mechanical Q factor [Qms]        2.90           Minimum impedance [Zmin]        3.7 ?
Electrical Q factor [Qes]        0.38           Maximum impedance [Zo]         26.2 ?
Total Q factor [Qts]             0.33           DC resistance [Re]               3 ?
Force factor [Bl]              2.8 Tm           Voice coil inductance [Le]    0.01 mH
Mechanical resistance [Rms]  0.34 kg/s
Power Handling
Moving mass [Mms]                0.3 g
100h RMS noise test (IEC 17.1)*  160 W
Suspension compliance [Cms]  0.31 mm/N
Long-term max power (IEC 17.3)*    - W
Effective diaph. diameter [D]  27 mm
*Filter: 2. order HP Butterworth, 2.5 kHz
Effective piston area [Sd]    5.6 cm?
Voice Coil and Magnet Data
Equivalent volume [Vas]         0.01 l
Voice coil diameter             26 mm
Sensitivity (2.83V/1m)         94.5 dB
Voice coil height              2.1 mm
Ratio Bl/vRe                1.62 N/vW
Voice coil layers                   2
Ratio fs/Qts                  1566 Hz
Height of gap                  2.5 mm
Notes:                                         Linear excursion              ± 0.2 mm
IEC specs. refer to IEC 60268-5 third edition.   Max mech. excursion         ± 1.6 mm
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.     Unit weight                     0.4 kg
Datasheet updated: February 22, 2011.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

TWEETER                                                   R2904/700000
Advanced Parameters (Preliminary)
Electrical data:                                Mechanical Data
Resistance [Re']                  - ?           Force Factor [Bl]               - Tm
Free inductance [Leb]            - mH           Moving mass [Mms]                 - g
Bound inductance [Le]            - mH           Compliance [Cms]              - mm/N
Semi-inductance [Ke]             - SH           Mechanical resistance [Rms]     - kg/s
Shunt resistance [Rss]            - ?           Admittance [Ams]              - mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk