Динамик ВЧ SCANSPEAK D3004/660000. Инструкция на английском языке

TWEETER                                                   D3004/660000
The Illuminator tweeters stand for superb vocal rendition and excellent imaging at all
listening locations. Its large roll surround and textile dome diaphragm provides a flat
frequency response to above 30KHz with outstanding off-axis dispersion. The unique
AirCirc Magnet System, and its rear chamber, results in elimination of reflections and
resonances that compromise the performance of traditional motors.
KEY FEATURES:
? 1" Textile Dome Diaphragm                ? Large Roll Surround f. Wide Dispersion
? Patented Symmetrical Drive (SD-2) motor    ? AirCirc Motor Design w. 6 Neo magnets
? Die Cast Rubber Painted Alu Face Plate
T-S Parameters                                  Electrical Data
Resonance frequency [fs]       470 Hz           Nominal impedance [Zn]           4 ?
Mechanical Q factor [Qms]        3.00           Minimum impedance [Zmin]        3.5 ?
Electrical Q factor [Qes]        0.59           Maximum impedance [Zo]         18.4 ?
Total Q factor [Qts]             0.49           DC resistance [Re]               3 ?
Force factor [Bl]              2.3 Tm           Voice coil inductance [Le]    0.03 mH
Mechanical resistance [Rms]   0.3 kg/s
Power Handling
Moving mass [Mms]               0.35 g
100h RMS noise test (IEC 17.1)*  90 W
Suspension compliance [Cms]  0.33 mm/N
Long-term max power (IEC 17.3)*  150 W
Effective diaph. diameter [D]  30 mm
*Filter: 2. order HP Butterworth, 2.5 kHz
Effective piston area [Sd]      7 cm?
Voice Coil and Magnet Data
Equivalent volume [Vas]         0.02 l
Voice coil diameter             26 mm
Sensitivity (2.83V/1m)         91.5 dB
Voice coil height              2.1 mm
Ratio Bl/vRe                1.33 N/vW
Voice coil layers                   2
Ratio fs/Qts                   959 Hz
Height of gap                  2.5 mm
Notes:                                         Linear excursion              ± 0.2 mm
IEC specs. refer to IEC 60268-5 third edition.   Max mech. excursion         ± 1.6 mm
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.     Unit weight                     0.3 kg
Datasheet updated: February 22, 2011.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

TWEETER                                                   D3004/660000
Advanced Parameters (Preliminary)
Electrical data:                                Mechanical Data
Resistance [Re']                  - ?           Force Factor [Bl]               - Tm
Free inductance [Leb]            - mH           Moving mass [Mms]                 - g
Bound inductance [Le]            - mH           Compliance [Cms]              - mm/N
Semi-inductance [Ke]             - SH           Mechanical resistance [Rms]     - kg/s
Shunt resistance [Rss]            - ?           Admittance [Ams]              - mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk