Динамик ВЧ SCANSPEAK D3004/604010. Инструкция на английском языке

TWEETER                                                 D3004/604010
This 1” compact Illuminator beryllium tweeter is an example of a big sound in a small
body. As beryllium is a material characterised by great stiffness, light weight and
high damping, the beryllium diaphragm offers all the properties required to
reproduce excellent sound. And indeed, the 1” tweeter sounds great. It has a very
low distortion and a distinct clarity that brings out the best in all types of music.
KEY FEATURES:
· 1" Beryllium diaphragm (99% pure BE)    · Patented symetrical drive (SD-2) motor
· Large non resonant aluminium enclosure  · Large roll surround f. wide dispersion
· Sound transparant protective grill      · Applicable for HiFi and automotive
T-S Parameters                                Electrical Data
Resonance frequency [fs]      450 Hz          Nominal impedance [Zn]           4 ?
Mechanical Q factor [Qms]       2.50          Minimum impedance [Zmin]        3.6 ?
Electrical Q factor [Qes]       0.97          Maximum impedance [Zo]         11.2 ?
Total Q factor [Qts]            0.70          DC resistance [Re]               3 ?
Force factor [Bl]             1.7 Tm          Voice coil inductance [Le]   0.02 mH
Mechanical resistance [Rms]  0.4 kg/s
Power Handling
Moving mass [Mms]             0.35 g
100h RMS noise test (IEC 17.1)*  50 W
Compliance [Cms]           0.43 mm/N
Long-term max power (IEC 17.3)*  100 W
Effective diaph. diameter [D]  3 mm
*Filter: 2. order HP Butterworth, 2,5kHz
Effective piston area [Sd]     7 cm?
Voice Coil & Magnet Data
Equivalent volume [Vas]        0.03 l
Voice coil diameter            26 mm
Sensitivity (2.83V/1m)       90.2 dB
Voice coil height             2.1 mm
Ratio Bl/vRe               0.98 N/vW
Voice coil layers                  2
Ratio fs/Qts                  608 Hz          Height of gap                 2.5 mm
Linear excursion             ± 0.2 mm
Notes:
IEC specs. refer to IEC 60268-5 third edition.   Max mech. excursion      ± 1.6 mm
All Scan-Speak products are RoHS compliant.   Unit weight                   0.2 kg
Data are subject to change without notice.
Datasheet updated: October 28, 2015.
N.C. Madsensvej 1 · 6920 Videb?k · Denmark · Phone: +45 6040 5200 · www.scan-speak.dk

TWEETER                                                 D3004/604010
Advanced Parameters (Preliminary)
Electrical data                               Mechanical Data
Resistance [Re']                 - ?          Force Factor [Bl]               - Tm
Free inductance [Leb]           - mH          Moving mass [Mms]                 - g
Bound inductance [Le]           - mH          Compliance [Cms]              - mm/N
Semi-inductance [Ke]            - SH          Mechanical resistance [Rms]     - kg/s
Shunt resistance [Rss]           - ?          Admittance [Ams]              - mm/N
N.C. Madsensvej 1 · 6920 Videb?k · Denmark · Phone: +45 6040 5200 · www.scan-speak.dk