Динамик НЧ SCANSPEAK 26W/8867T00. Инструкция на английском языке

WOOFER                                                     26W/8867T00
The Revelator woofers and subwoofers features very rigid cones in paper or aluminium
that operates as a piston over a wide frequency range, in combination with Scan-
Speaks low-loss linear suspension and the patented Symmetrical Drive (SD-1) it
results in very low distortion and a smooth and well behaved frequency response as
well as perfect transient reproduction.
KEY FEATURES:
? Patented Symmetrical Drive Motor Design    ? Rigid Black Anodized Alu Cone
? Low-Loss linear suspension               ? Low Damping SBR Rubber Surround
? Die cast Alu Chassis vented below spider    ? Ferrite Magnet System w. Rubber Boot
T-S Parameters                                  Electrical Data
Resonance frequency [fs]        19 Hz           Nominal impedance [Zn]           8 ?
Mechanical Q factor [Qms]        4.50           Minimum impedance [Zmin]        6.8 ?
Electrical Q factor [Qes]        0.31           Maximum impedance [Zo]         90.0 ?
Total Q factor [Qts]             0.29           DC resistance [Re]              5.8 ?
Force factor [Bl]             11.2 Tm           Voice coil inductance [Le]     0.4 mH
Mechanical resistance [Rms]  1.51 kg/s
Power Handling
Moving mass [Mms]                57 g
100h RMS noise test (IEC 17.1)  170 W
Suspension compliance [Cms]  1.23 mm/N
Long-term max power (IEC 17.3)     - W
Effective diaph. diameter [D]  202 mm
Effective piston area [Sd]    320 cm?          Voice Coil and Magnet Data
Equivalent volume [Vas]          176 l         Voice coil diameter             50 mm
Sensitivity (2.83V/1m)          87 dB          Voice coil height               24 mm
Ratio Bl/vRe                4.65 N/vW          Voice coil layers                   2
Height of gap                    6 mm
Ratio fs/Qts                    66 Hz
Linear excursion               ± 9 mm
Notes:                                         Max mech. excursion           ± 14 mm
IEC specs. refer to IEC 60268-5 third edition.   Unit weight                   3.7 kg
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

WOOFER                                                     26W/8867T00
Advanced Parameters (Preliminary)
Electrical data:                                Mechanical Data
Resistance [Re']               6.32 ?           Force Factor [Bl]             9.28 Tm
Free inductance [Leb]        0.170 mH           Moving mass [Mms]              54.3 g
Bound inductance [Le]        0.823 mH           Compliance [Cms]           1.12 mm/N
Semi-inductance [Ke]        0.0379 SH           Mechanical resistance [Rms]  0.086 kg/s
Shunt resistance [Rss]         2309 ?           Admittance [Ams]          0.210 mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk