Динамик НЧ SCANSPEAK 25W/8565-00. Инструкция на английском языке

WOOFER                                                      25W/8565-00
The Symmetric Drive (SD-1) concept with copper in the magnet system was invented
by Scan-Speak. High-quality magnet system design has thus been a key feature of
Scan-Speak design since the companys inception. The Classic woofers are highly
praised, and are used in some of the worlds most exceptional high-end Loudspeakers.
Some feature Kevlar cones, others have the innovative Carbon fibre/Paper cones.
KEY FEATURES:
? Patented Symmetrical Drive Motor Design    ? Low Resonance Freq. 20Hz
? Low-Loss linear suspension               ? Air Dried Paper/Carbon Fibre Cone
? Low Damping SBR Rubber Surround          ? 42mm Voice Coil
T-S Parameters                                  Electrical Data
Resonance frequency [fs]        20 Hz           Nominal impedance [Zn]           8 ?
Mechanical Q factor [Qms]        5.40           Minimum impedance [Zmin]        6.2 ?
Electrical Q factor [Qes]        0.44           Maximum impedance [Zo]         73.0 ?
Total Q factor [Qts]             0.41           DC resistance [Re]              5.5 ?
Force factor [Bl]              8.2 Tm           Voice coil inductance [Le]     0.4 mH
Mechanical resistance [Rms]  1.00 kg/s
Power Handling
Moving mass [Mms]                43 g
100h RMS noise test (IEC 17.1)  100 W
Suspension compliance [Cms]  1.47 mm/N
Long-term max power (IEC 17.3)     - W
Effective diaph. diameter [D]  205 mm
Effective piston area [Sd]    330 cm?          Voice Coil and Magnet Data
Equivalent volume [Vas]          225 l         Voice coil diameter             42 mm
Sensitivity (2.83V/1m)          88 dB          Voice coil height               19 mm
Ratio Bl/vRe                3.50 N/vW          Voice coil layers                   2
Height of gap                    6 mm
Ratio fs/Qts                    49 Hz
Linear excursion              ± 6.5 mm
Notes:                                         Max mech. excursion           ± 12 mm
IEC specs. refer to IEC 60268-5 third edition.   Unit weight                   2.3 kg
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

WOOFER                                                      25W/8565-00
Advanced Parameters (Preliminary)
Electrical data:                                Mechanical Data
Resistance [Re']               5.67 ?           Force Factor [Bl]             7.22 Tm
Free inductance [Leb]        0.173 mH           Moving mass [Mms]              45.4 g
Bound inductance [Le]         1.55 mH           Compliance [Cms]          0.994 mm/N
Semi-inductance [Ke]        0.0306 SH           Mechanical resistance [Rms]  0.060 kg/s
Shunt resistance [Rss]         2309 ?           Admittance [Ams]          0.134 mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk