На сайте 124169 инструкций общим размером 502.7 Гб , которые состоят из 6277380 страниц
Руководство пользователя SCANSPEAK 21W/8555-00. Основные функции, характеристики и условия эксплуатации изложены на 2 страницах документа в pdf формате.
Доступно к просмотру 2 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
Classic ? 8 Woofer Type Number: 21W/8555-00 Features: The Classic line consists of all the highly regarded transducers that have been appraised and loved by so many customers over the years. The goal has been to assemble all the diamonds, developed over the years, speakers that fully live up to the heritage of the brand. Driver Highlights: Hard paper cone, low loss rubber surround, SD-1 motor Specs: Electrical Data Power handling Nominal impedance Zn 8 ohm 100h RMS noise test (IEC) 100 W Minimum impedance Zmin -- ohm Long-term Max Power (IEC 18.3) -- W Maximum impedance Zo -- ohm Max linear SPL (rms) @ power -- dB/W DC resistance Re 5.5 ohm Short Term Max power (IEC 18.2) -- W Voice coil inductance Le 0.4 mH Voice Coil and Magnet Parameters T-S Parameters Voice coil diameter 42 mm Resonance Frequency fs 20 Hz Voice coil height -- mm Mechanical Q factor Qms 4.5 Voice coil layers -- Electrical Q factor Qes 0.33 Height of the gap -- mm Total Q factor Qts 0.31 Linear excursion +/- 6.5 mm Force factor Bl 8.2 Tm Max mech. excursion +/- 12 mm Mechanical resistance Rms 0.9 Kg/s Flux density of gap -- mWb Moving mass Mms 32 g Total useful flux -- mWb Suspension compliance Cms -- mm/N Diameter of magnet -- mm Effective cone diameter D -- cm Height of magnet -- mm 2 -- Kg Effective piston area Sd 220 cm Weight of magnet Equivalent volume Vas 136 ltrs Sensitivity (2.83V/1m) 87 dB v Ratio BL/ (Re) -- Notes: IEC specs refer to IEC 60268-5 third edition. Ratio fs/Qts F -- All ScanSpeak products are RoHS compliant.
Frequency: 21W/8555-00 Mechanical Dimensions:21W/8555-00 Drawing Dimensions Outside Diameter Flange Thickness Magnet Diameter Cutout Diameter Interior Depth Hole Diameter Screw Circle Diameter © 2009, ScanSpeak. All rights reserved.