Динамик СЧ/НЧ SCANSPEAK 15W/8531K00. Инструкция на английском языке

MIDWOOFER                                                  15W/8531K00
The Revelator midrange and midwoofers, both well known for their sliced paper cone
technology. The slices are filled with damping glue, which dramatically reduces break-
up modes in the diaphragm. In combination with Scan-Speaks low-loss linear
suspension and the patented Symmetrical Drive (SD-1) it represented a breakthrough
in midrange clarity and overall smooth frequency response characteristics.
KEY FEATURES:
? Patented Symmetrical Drive Motor Design    ? Sliced Cone (Controls Cone Breakups)
? Low-Loss linear suspension               ? Low Damping SBR Rubber Surround
? Die cast Alu Chassis vented below spider    ? Large Ferrite Magnet System
T-S Parameters                                  Electrical Data
Resonance frequency [fs]        32 Hz           Nominal impedance [Zn]           8 ?
Mechanical Q factor [Qms]        5.23           Minimum impedance [Zmin]        6.8 ?
Electrical Q factor [Qes]        0.33           Maximum impedance [Zo]         97.7 ?
Total Q factor [Qts]             0.31           DC resistance [Re]              5.8 ?
Force factor [Bl]              6.8 Tm           Voice coil inductance [Le]    0.35 mH
Mechanical resistance [Rms]  0.50 kg/s
Power Handling
Moving mass [Mms]                13 g
100h RMS noise test (IEC 17.1)   60 W
Suspension compliance [Cms]  1.90 mm/N
Long-term max power (IEC 17.3)     - W
Effective diaph. diameter [D]  110 mm
Effective piston area [Sd]     95 cm?          Voice Coil and Magnet Data
Equivalent volume [Vas]         24.0 l         Voice coil diameter             38 mm
Sensitivity (2.83V/1m)         85.5 dB         Voice coil height               18 mm
Ratio Bl/vRe                2.82 N/vW          Voice coil layers                   2
Height of gap                    5 mm
Ratio fs/Qts                   103 Hz
Linear excursion              ± 6.5 mm
Notes:                                         Max mech. excursion            ± 9 mm
IEC specs. refer to IEC 60268-5 third edition.   Unit weight                   1.7 kg
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

MIDWOOFER                                                  15W/8531K00
Advanced Parameters (Preliminary)
Electrical data:                                Mechanical Data
Resistance [Re']               6.18 ?           Force Factor [Bl]             6.12 Tm
Free inductance [Leb]        0.176 mH           Moving mass [Mms]              12.1 g
Bound inductance [Le]        0.430 mH           Compliance [Cms]           1.70 mm/N
Semi-inductance [Ke]           110 SH           Mechanical resistance [Rms]  0.141 kg/s
Shunt resistance [Rss]         4.07 ?           Admittance [Ams]          0.215 mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk