Динамик СЧ/НЧ SCANSPEAK 10F/8414G10. Инструкция на английском языке

FULLRANGE                                                   10F/8414G10
The Discovery series offer traditional design, superior sound, a solid construction, and
a wide range of variants. Combining these elements - plus a wealth of technical
features and finesses - gives our customers the possibility of acquiring a tailor-made
Scan-Speak solution with very good performance at a reasonable low price point!
KEY FEATURES:
? Wide Frequency Range                     ? Vented Alu. Chassis, SBR Rubber Surround
? Compact Neo magnet Motor                 ? High Sensitivity 86dB/2,83V
? Copper Cap on Pole Piece                 ? Coated NRSC Fibre Glass Cone (patent)
T-S Parameters                                  Electrical Data
Resonance frequency [fs]       100 Hz           Nominal impedance [Zn]           8 ?
Mechanical Q factor [Qms]        2.44           Minimum impedance [Zmin]        6.8 ?
Electrical Q factor [Qes]        0.65           Maximum impedance [Zo]         28.4 ?
Total Q factor [Qts]             0.51           DC resistance [Re]              6.3 ?
Force factor [Bl]             4.27 Tm           Voice coil inductance [Le]    0.11 mH
Mechanical resistance [Rms]  0.76 kg/s
Power Handling
Moving mass [Mms]               2.93 g
100h RMS noise test (IEC 17.1)   10 W
Compliance [Cms]            0.86 mm/N
Long-term max power (IEC 17.3)   20 W
Effective diaph. diameter [D]  68 mm
Effective piston area [Sd]   36.3 cm?           Voice Coil & Magnet Data
Equivalent volume [Vas]         1.57 l         Voice coil diameter           19.4 mm
Voice coil height              8.7 mm
Sensitivity (2.83V/1m)          86 dB
Voice coil layers                   2
Ratio Bl/vRe                1.71 N/vW
Height of gap                    4 mm
Ratio fs/Qts                   196 Hz
Linear excursion              ± 2.3 mm
Notes:                                         Max mech. excursion           ± 7.5 mm
IEC specs. refer to IEC 60268-5 third edition.    Unit weight                 0.16 kg
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: June 7. 2013.
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk

FULLRANGE                                                   10F/8414G10
Advanced Parameters (Preliminary)
Electrical data                                 Mechanical Data
Resistance [Re']               6.40 ?           Force Factor [Bl]             4.29 Tm
Free inductance [Leb]        0.029 mH           Moving mass [Mms]               2.8 g
Bound inductance [Le]         0.57 mH           Compliance [Cms]           0.72 mm/N
Semi-inductance [Ke]         0.062 SH           Mechanical resistance [Rms]  0.84 kg/s
Shunt resistance [Rss]            4 ?           Admittance [Ams]           0.11 mm/N
N.C. Madsensvej 1 ? 6920 Videb?k ? Denmark ? Phone: +45 6040 5200 ? www.scan-speak.dk