На сайте 124169 инструкций общим размером 502.7 Гб , которые состоят из 6277380 страниц
Руководство пользователя ROTEL RSX-1560. Основные функции, характеристики и условия эксплуатации изложены на 54 страницах документа в pdf формате.
Доступно к просмотру 54 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
RSX-1560 Surround Sound Receiver Register your product at Owner’s Manual www.Rotel.com/register RSX-1560 English v2.indd 1 29/9/08 15:13:46
RSX-1560 Surround Sound Receiver English 2 2 RSX-1560 Surround Sound Receiver English 3 3 > 10 cm > 4 in > 10 cm > 10 cm > 4 in > 4 in > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. RSX-1560 English v2.indd 2 29/9/08 15:13:56
English RSX-1560 Surround Sound Receiver 2 2 RSX-1560 Surround Sound Receiver English 3 3 Notice Important Safety Instructions The COMPUTER I/O connection should be handled by authorized persons only. WARNING: There are no user serviceable parts inside. Refer all servicing to quali?ed service personnel. FCC Information WARNING: To reduce the risk of ?re or electric shock, do not expose the unit to moisture or water. This equipment has been tested and found to comply with the limits for a Class B digital device, Do not expose the unit to dripping or splashing. Do not place objects ?lled with liquids, such as pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to against harmful interference in a residential installation. This equipment generates, uses and can moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from radiate radio frequency energy and, if not installed and used in accordance with the instruction, the wall. Take the unit to a quali?ed service person for inspection and necessary repairs. may cause harmful interference to radio communications. Read all the instructions before connecting or operating the unit. However, there is no guarantee that interference will not occur in a particular installation. If Keep this manual so you can refer to these safety instructions. this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Heed all warnings and safety information in these instructions and on the product itself. Follow all interference by one or more of the following measures: operating instructions. • Reorient or relocate the receiving antenna.(TV, radio, etc.) Clean the enclosure only with a dry cloth or a vacuum cleaner. • Increase the separation between the equipment and receiver Do not use this unit near water. • Connect the equipment to an outlet on circuit different from that to which the receiver is You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not connected. place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper • Consult the dealer or an experienced radio/TV technician for additional help. cooling. Caution Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. This device complies with part 15 of the FCC Rules. Operation is subject to the following to conditions: (1) This device may not cause harmful interference, and (2) this device must accept any The unit must be connected to a power supply only of the type and voltage speci?ed on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz) interference received, including interference that may cause undesired operation. Connect the component to the power outlet only with the supplied power supply cable or an exact NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installer’s attention to equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular, speci?es the other. A grounding plug has two blades plus a third grounding prong. These are provided for that the cable ground shall be connected to the grounding system of the building, as close to the your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug point of cable entry as practical. See installation diagram. does not ?t your outlet, please consult an electrician for replacement of the obsolete outlet. Do not NOTE: This equipment has been tested and found to comply with the limits for a Class B digital use extension cords. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable The main plug of the power cordset is a disconnect device of the apparatus. In order to completely protection against interference in a residential installation. This equipment generates and can disconnect the apparatus from the supply mains, the main plug of the power cordset should be radiate radio frequency energy and, if not installed and used in accordance with the instructions, unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the may cause interference to radio or TV communications. There is no guarantee that interference will power cord is unplugged. The disconnect device should remain readily operable. not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in interference by one or more of the following measures: any way. Pay particular attention to the power cord at the plug and where the cord exits the unit. • Reorient or relocate the receiving antenna. The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period. • Increase the separation between the unit and the television tuner. Use only accessories speci?ed by the manufacturer. • Connect the unit to an AC power outlet on a different electrical circuit. Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when • Consult your authorized Rotel retailer for assistance. moving the unit in a stand or rack to avoid injury from a tip-over. Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk of electrical shock. Immediately stop using the component and have it inspected and/or serviced by a quali?ed service agency if: • The power supply cord or plug has been damaged. • Objects have fallen or liquid has been spilled into the unit. • The unit has been exposed to rain. • The unit shows signs of improper operation • The unit has been dropped or damaged in any way WARNING: The master power switch is located on the rear panel. The unit must be located in the open area allowing unobstructed access to the main power switch. RSX-1560 English v2.indd 3 29/9/08 15:13:59