Устройство ROTEL RSX-1057. Инструкция на английском языке

Owner’s manual
RSX-1057
Surround Sound Receiver
?????????????????????????????????
???????
??????
?  ?  ?  ?  ?  ??????  ????  ??  ?????  ?????  ??????  ??????  ??????  ??????  ??????
?????II?  ???  ?????
?  ?  ?  ?  ?  ??????  ????  ??????  ???  ????  ?????  ???  ?????  ????  ????  ???

> 10 cm  > 4 in
SURROUND SOUND RECEIVER  RSX-1057
STANDBY
> 10 cm                               > 10 cm
> 4 in    1  2  3  4  5  TUNING  BAND  VOLUME  CD  TUNER  TAPE1  VIDEO1  VIDEO2  VIDEO3  VIDEO4  VIDEO5  > 4 in
PLIIx  DTS  MULTI
6  7  8  9  0  DIRECT  MONO  MEMORY  2CH  MODE  Neo 6  DSP  INPUT  MUTE  ZONE  REC
> 10 cm
> 4 in
Rotel products are designed to comply with international directives on the
Restriction of Hazardous Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical and Electronic Equipment
(WEEE). The crossed wheelie bin symbol indicates compliance and that
the products must be appropriately recycled or processed in accordance
with these directives.
This symbol means that this unit is double insulated. An earth or ground
connection is not required.

Notice                                               Important Safety Instructions
The COMPUTER I/O connection should be handled by authorized person   WARNING: There are no user serviceable parts inside. Refer all servicing to quali?ed
only.                                               service personnel.
WARNING: To reduce the risk of ?re or electric shock, do not expose the unit to mois-
FCC Information                                      ture or water. Do not expose the unit to dripping or splashing. Do not place objects ?lled with
This equipment has been tested and found to comply with the limits for a Class B digital device,   liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-  unit is exposed to moisture, or a foreign object gets into the enclosure, immediately discon-
tion against harmful interference in a residential installation. This equipment generates, uses   nect the power cord from the wall. Take the unit to a quali?ed service person for inspection
and can radiate radio frequency energy and, if not installed and used in accordance with the   and necessary repairs.
instruction, may cause harmful interference to radio communications.  Read all the instructions before connecting or operating the component.
However, there is no guarantee that interference will not occur in a particular installation. If   Keep this manual so you can refer to these safety instructions.
this equipment does cause harmful interference to radio or television reception, which can be   Heed all warnings and safety information in these instructions and on the product itself. Fol-
determined by turning the equipment off and on, the user is encouraged to try to correct the   low all operating instructions.
interference by one or more of the following measures:
Clean the enclosure only with a dry cloth or a vacuum cleaner.
•  Reorient or relocate the receiving antenna.(TV, radio, etc.)
Do not use this unit near water.
•  Increase the separation between the equipment and receiver
You must allow a minimum 10 cm or 4 inches of unobstructed clearance around
•  Connect the equipment to an outlet on circuit different from that to which the receiver is   the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ven-
connected.                                        tilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the
•  Consult the dealer or an experienced radio/TV technician for additional help.  cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
Caution                                              produces heat.
This device complies with part 15 of the FCC Rules operation is subject to the following to condi-  The unit must be connected to a power supply only of the type and voltage speci?ed on the rear
tions:  (1) This device may not cause harmful interference, and (2) this device must accept any   panel. (USA: 120 V/60Hz, EC: 230V/50Hz)
interference received, including interference that may cause undesired operation.  Connect the component to the power outlet only with the supplied power supply cable or an
exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one
wider than the other. A grounding plug has two blades plus a third grounding prong. These are
NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna   provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the
installer’s attention to Article 820-40 of the NEC. This provides guidelines for proper grounding   supplied plug does not ?t your outlet, please consult an electrician for replacement of the ob-
and, in particular, speci?es that the cable ground shall be connected to the grounding system of   solete outlet. Do not use extension cords.
the building, as close to the point of cable entry as practical. See installation diagram.  The main plug of the power cordset is a disconnect device of the apparatus. In order to com-
NOTE: This equipment has been tested and found to comply with the limits for a Class B   pletely disconnect the apparatus from the supply mains, the main plug of the power cordset
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-  should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up
sonable protection against interference in a residential installation. This equipment generates   to show the power cord is unplugged.
and can radiate radio frequency energy and, if not installed and used in accordance with the   Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or dam-
instructions, may cause interference to radio or TV communications. There is no guarantee that   aged in any way. Pay particular attention to the power cord at the plug and where the cord
interference will not occur in a particular installation. If this equipment does cause interference   exits the back of the unit.
to radio or television reception, which can be determined by turning the equipment off and on,   The power cord should be unplugged from the wall outlet during a lightning storm or if the unit
try to correct the interference by one or more of the following measures:  is to be left unused for a long period of time.
•  Reorient or relocate the receiving antenna.       Use only accessories speci?ed by the manufacturer.
•  Increase the separation between the unit and the television tuner.  Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution
•  Connect the unit to an AC power outlet on a different electrical circuit.  when moving the unit in a stand or rack to avoid injury from a tip-over.
•  Consult your authorized Rotel retailer for assistance.  Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk
of electrical shock.
Immediately stop using the component and have it inspected and/or serviced by a quali?ed
service agency if:
•  The power supply cord or plug has been damaged.
•  Objects have fallen or liquid has been spilled into the unit.
•  The unit has been exposed to rain.
•  The unit shows signs of improper operation
•  The unit has been dropped or damaged in any way
WARNING: The master power switch is located on the rear panel. The unit must be lo-
cated in the open area allowing unobstructed access to the main power switch.