Комплект акустических систем PIONEER S-ES21TB. Инструкция на русском языке

S-ES21-LR.fm  1 ???  2013?7?18? ??? ??9?25?
S-ES21-LR-K                                                  Operating Instructions
S-ES21-LR-T                                                         Speaker System
WHAT’S IN THE BOX
?Operating instructions    ?Speaker cords x 2
?Front speaker x 2
?Front Grilles x 2
If this happens, turn off the television, then turn it on
BEFORE USE                                     again after 15 min to 30 min. If the problem persists,
place the speaker system away from the television
Thank you for buying this Pioneer product.     set.
Please read through these operating instructions before   • Do not install your speakers overhead on the ceiling
using your speaker system to optimize performance.  or wall. The grille is designed to be detachable, and
• This speaker system has an impedance of 8 ?, and   as such it may fall and cause damage or personal
should be connected only to an amplifier designed   injury if installed overhead.
with a load impedance of 8 ? (the amplifier’s speaker
output connector should clearly be labeled “8 ?“).  • Do not place heavy or large objects on top of the
• In order to prevent damage to the speaker system   speaker. Doing so could provoke the speaker to fall,
resulting from input overload, please observe the   causing damages or bodily injury.
following precautions:
-Be sure to turn the connected devices off and
remove the power cord from the wall outlet   PLACEMENT AND FINE TUNING
beforehand when changing the connection or
installation method.                    For best results the speakers should be separated a
-Do not use excessive amplifier volume if using a   distance approximately equal to the listening distance.
tone control to emphasize high or low frequencies.  Angling the speakers inward towards the listener will
• Do not use the speaker to output distorted sound for    improve the image stability for non-central listeners.
long periods of time. This can result in a fire hazard.  Close proximity to a side or rear wall will enhance the
midbass performance, although too close (particularly a
corner location) and the bass may be unnaturally high
INSTALLATION PRECAUTIONS                    and image performance may be degraded.
• Do not install these units near a stove or other
heating appliance, or put them in a place exposed to
the sun. Such locations may cause the cabinet to
change color and the speaker system to break down.
• Do not attach the front speakers to the wall or ceiling.
It may fall off and cause injury.
• Placing the stand on an unstable surface can be
dangerous. Be sure to place it on a flat, firm surface.
• This speaker system is magnetically shielded.
However, depending on the installation location,
color distortion may occur if the speaker system is
installed extremely close to the screen of a television
set.
1
En

S-ES21-LR.fm  2 ???  2013?7?18? ??? ??9?25?
Amplifier             Speakers
STANDARD SURROUND SETUP
This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front                      Front
left                      right
Connect to the speaker terminals on the rear of
the speakers.
Unscrew the terminals on the speaker and insert the red
Center                    marked speaker cord into the red (+) terminal and the
Subwoofer
(not supplied)  other cord into the black (–) terminal as shown below.
Listening position
Surround left              Surround right     Black                Red
Red marked half of speaker cord
MAKING AMPLIFIER SETTINGS                                Other half of speaker cord
Before connecting the speakers, please read the
operating instructions supplied with your amplifier to
select the speaker setting of amplifier :    SECURING THE FRONT SPEAKERS
• FRONT SPEAKERS : LARGE
• Pass a commercially-available reinforced string
through the plastic catch to securely support the
CONNECTING YOUR SYSTEM                         speaker to the wall. Be sure that the wall to which you
fasten the speaker is strong enough to support the
weight of the speaker. After fastening the speaker,
make sure that it does not fall over.
• The speaker can incur damage in the event of a fall.
Make sure all equipment is turned off before making any   • Do not attach the plastic catch directly to the wall. It
connections.                                   should only be used in conjunction with reinforced
• Correct wiring of your speakers is essential for   string to prevent the speaker from falling.
achieving the best sound quality. Be careful to
ensure proper polarity of connection.                Reinforced strings  Plastic catch
CAUTION
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
D3-4-2-2-3_A1_En
Connect to the speaker terminals on the rear of
the amplifier.                                                  Backside of speaker
Connect the red marked speaker cord to the red (+)
terminal and the other cord to the black (–) terminal as   Pass and tie two reinforced strings through the plastic
shown below (for more details, refer to your amplifier   catch, and fasten the speaker to the wall as shown above.
instruction manual).
After connecting the plugs, pull lightly on the cords to   • If you are unsure of the quality and strength of the
make sure that the ends of the cords are securely con-  walls, consult a professional for advice.
nected to the terminals. Poor connections can create
noise and interruptions in the sound.         • Pioneer is not responsible for any accidents or
damage that result from improper installation.
2
En

S-ES21-LR.fm  3 ???  2013?7?18? ??? ??9?25?
CABINET MAINTENANCE
Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the cabinet is very dirty, clean with a soft cloth
dipped in some neutral cleanser diluted five or six times
with water, and then wipe again with a dry cloth. Do not
use furniture wax or cleaners.
Never use thinners, benzine, insecticide sprays and other
chemicals on or near the cabinets, since these will
corrode the surfaces.
ATTACHING / DETATCHING THE GRILLE
The front grille of this speaker system is removable.
Proceed as follows:
1.  To detatch the grille, grab it by its bottom with both
hands and toward you to separate the bottom part of
the grille from the speaker.
2.  Next, grab the top part of the grille and gently pull it
toward you to remove the top portion.
3.  To replace the grille, align the holes in the front of the
speaker’s corners with the projections on the grille,
and push each of the corners into place.
TROUBLESHOOTING
Symptom Possible cause    Remedy
No sound  • Bad speaker cord or   • Connect correctly or
connection.       replace cord.
• Amplifier is off.  • Turn on amplifier.
• Volume control is at zero. • Slowly turn up volume.
Sound is   • Extreme signal condition. • Turn down the
distorted.                amplifier’s output level
(volume, bass control,
bass boost) to lower the
level.
3
En