Динамик НЧ PEERLESS XLS 10 8 Ohm 830452. Инструкция на английском языке

XLS
10? Subwoofer
Type Number: 830452
Features:
This new series of state-of-the-art subwoofers continue to
enhance Peerless' reputation for delivering the highest quality
components for bass in the world. Called the XLS - for "Extra
Long Stroke" - these new audio transducers add even more
excursion, and completely eliminate distortion.
See architecture notes for XLS Platform
Driver Highlights: Thick Nomex cone, 51 mm voice coil, ALP
See application notes for XLS subwoofer
Go to Architecture Notes
Specs:
Electrical Data                                         Power handling
Nominal impedance               Zn     8      ohm       100h RMS noise test (IEC)          --     W
Minimum impedance               Zmin   4.9    ohm       Long-term Max Power (IEC 18.3)     --     W
Maximum impedance               Zo     53.3   ohm       Max linear SPL (rms) @ power       --     dB/W
DC resistance                   Re     3.4    ohm       Short Term Max power (IEC 18.2)    --     W
Voice coil inductance           Le     4.3    mH        Voice Coil and Magnet Parameters
Capacitor in series with x ohm   Cc    22     uF        Voice coil diameter                51     mm
T-S Parameters                                          Voice coil height                  33     mm
Resonance Frequency             fs    18.9    Hz        Voice coil layers                  4
Mechanical Q factor             Qms   2.63              Height of the gap                  8      mm
Electrical Q factor             Qes   0.18              Linear excursion +/-               --     mm
Total Q factor                  Qts   0.17              Max mech. excursion +/-            --     mm
Force factor                    Bl    17.5    Tm        Flux density of gap                1.04   mWb
Mechanical resistance           Rms   6.12    Kg/s      Total useful flux                  2.5    mWb
Moving mass                     Mms   135.3   g         Diameter of magnet                 147    mm
Suspension compliance           Cms   0.52    mm/N      Height of magnet                   35     mm
Effective cone diameter         D     21.2    cm         Weight of magnet                  2.42   Kg
2
Effective piston area           Sd    352     cm
Equivalent volume               Vas   89.7    ltrs
Sensitivity (2.83V/1m)                88.4    dB
Ratio BL/v(Re)                        112               Notes:
IEC specs refer to IEC 60268-5 third edition.
Ratio fs/Qts                   F     --                All Tymphany products are RoHS compliant.

Frequency: 830452
Mechanical Dimensions:830452
Tymphany™ and are trademarks of Tymphany Corporation.  © 2009, Tymphany Corporation.  All rights reserved.     012409