Динамик НЧ PEERLESS SLS 10 8 Ohm 830668. Инструкция на английском языке

SLS
10? Subwoofer
Type Number: 830668
Features:
The SLS line combines high quality performance with an
affordable design. These transducers are ideal for use in systems
with high power handling requirements, and are logically
combined with the SDS line.
See architecture notes for SLS Platform
Driver Highlights: Coated paper cone, 39 mm voice coil, AL
shorting ring in magnet system.
Go to Application Notes.
Go to Architecture Notes
Specs:
Electrical Data                                         Power handling
Nominal impedance               Zn     8      ohm       100h RMS noise test (IEC)          --     W
Minimum impedance               Zmin   6.3    ohm       Long-term Max Power (IEC 18.3)     --     W
Maximum impedance               Zo     53.2   ohm       Max linear SPL (rms) @ power       --     dB/W
DC resistance                   Re     5.6    ohm       Short Term Max power (IEC 18.2)    --     W
Voice coil inductance           Le     3.3    mH        Voice Coil and Magnet Parameters
Capacitor in series with x ohm   Cc    --     uF        Voice coil diameter                39     mm
T-S Parameters                                          Voice coil height                  24     mm
Resonance Frequency             fs     33.3   Hz        Voice coil layers                  4
Mechanical Q factor             Qms    4.85             Height of the gap                  8      mm
Electrical Q factor             Qes    0.57             Linear excursion +/-               8      mm
Total Q factor                  Qts    0.51             Max mech. excursion +/-            --     mm
Force factor                    Bl     10.2   Tm        Flux density of gap                --     mWb
Mechanical resistance           Rms    2.2    Kg/s      Total useful flux                  1.3    mWb
Moving mass                     Mms    51.1   g         Diameter of magnet                 115    mm
Suspension compliance           Cms    0.45   mm/N      Height of magnet                   22     mm
Effective cone diameter         D      20.7   cm         Weight of magnet                  0.87   Kg
2
Effective piston area           Sd     335    cm
Equivalent volume               Vas    69.3   ltrs
Sensitivity (2.83V/1m)                 88.7   dB
Ratio BL/v(Re)                         4.3              Notes:
IEC specs refer to IEC 60268-5 third edition.
Ratio fs/Qts                   F      65               All Tymphany products are RoHS compliant.

Frequency:
Mechanical Dimensions:
Tymphany™ and Peerless™ are trademarks of Tymphany Corporation.  © 2008, Tymphany Corporation.  All rights reserved.     060208