Динамик ВЧ PEERLESS HDS 1 8 Ohm 810921. Инструкция на английском языке

HDS
1? Tweeter
Type Number: 810921
Features:
The new Peerless HDS tweeter builds on Peerless’ long history
of tweeter design by optimizing several key design elements for
pure, clean music reproduction. The HDS tweeter uses a very
light, low mass “soft dome” with high internal damping, and a
highly-optimized, low-compression magnet system, which was
designed especially for the low mass dome. The result is a driver
that has both good sensitivity and an impressive range into the
lower frequencies.
The low mass dome, coupled with a fully vented motor system
provides non-compressed sound reproduction over the entire
frequency response. This combination allows the HDS tweeter to
be used in systems with lower cross-over points than is
recommended for most normal tweeters, making this product a
powerful tool for any acoustic designer in the process of tuning a
system.
The HDS tweeter is ideal for use in applications including home
entertainment, studio monitors, and general hi-fi systems.
See architecture notes for HDS Platform
Driver Highlights: 104 DT 26 72 SF HDS DM 8/6 OHM
Specs: Preliminary
Electrical Data                                         Power handling
Nominal impedance               Zn     8      ohm       Long-term Max Power (IEC 18.3)     --     W
Minimum impedance               Zmin   --     ohm       Short Term Max power (IEC 18.2)    --     W
Maximum impedance               Zo     --     ohm       Voice Coil and Magnet Parameters
DC resistance                   Re     5.6    ohm       Voice coil diameter                26     mm
Voice coil inductance           Le     --     mH        Voice coil height                  1.5    mm
T-S Parameters                                          Voice coil layers                  2
Resonance Frequency             fs     700    Hz        Height of the gap                  2.5    mm
Mechanical Q factor             Qms    --               Flux density of gap                --     mWb
Electrical Q factor             Qes    --               Total useful flux                  --     mWb
Total Q factor                  Qts    --               Diameter of magnet                 72     mm
Force factor                    Bl     --     Tm        Height of magnet                   22     mm
Mechanical resistance           Rms    --     Kg/s       Weight of magnet                  --     Kg
Moving mass                     Mms    --     g
Suspension compliance           Cms    --     mm/N
Effective cone diameter         D      --     cm
2
Effective piston area           Sd     --     cm
Equivalent volume               Vas    --     ltrs      Notes:
IEC specs refer to IEC 60268-5 third edition.
Sensitivity (2.83V/1m)                93     dB        All Tymphany products are RoHS compliant.

Frequency: Preliminary 810921
Mechanical Dimensions:810921
Tymphany™ and are trademarks of Tymphany Corporation.  © 2009, Tymphany Corporation.  All rights reserved.     012409