Динамик широкополосный PEERLESS 3 8 Ohm 830986. Инструкция на английском языке

3? Full Range
Type Number: 830986
Features:
Peerless full range drivers set the standard for quality audio in
products including flat panel televisions and sound bars, MP3 and
cell phone docking stations, and multimedia PCs. With their high
power handling, smooth, even dispersion and low distortion, the
Peerless full range drivers can be paired with the Tymphany
LAT250 for great bass performance.
Features include: A Neodymium motor structure and double-
venting system that helps keep dynamic range intact, as the
transducer can handle more power and dissipate excess heat
efficiently. An anodized aluminum dome provides superior sound
dispersion and off-axis response. A semi-progressive surround
reduces distortion, especially at high output through long
excursion. The drivers’ direct connected dome dust cap
(connected to the magnet system voice coil) improves dispersion
at high frequencies, providing superior sound on the high notes.
The inserted cupper cap on the pole piece ensures control the
system impedance, thereby extending the upper frequency range
Specs:
Electrical Data                                         Power handling
Nominal impedance               Zn     8      ohm       Long-term Max Power (IEC 18.3)     80     W
Minimum impedance               Zmin   6.8    ohm       Misc. Parameters
Maximum impedance               Zo     54.8   ohm                                          50-    Hz
DC resistance                   Re     6.5    ohm       Effective Frequency range (IEC 21.2)   20k
Voice coil inductance           Le     0.6    mH        Frame dimensions                   78     mm
Total Mass                         208    grams
T-S Parameters                                                                             3602 Hz
Resonance Frequency             fs     83.8   Hz         Frequency at ka=2
Mechanical Q factor             Qms    5.04
Electrical Q factor             Qes    0.67
Total Q factor                  Qts    0.59
Force factor                    Bl     3.4    Tm
Mechanical resistance           Rms    0.24   Kg/s
Moving mass                     Mms    2.3    g
Suspension compliance           Cms    1.56   mm/N
Effective cone diameter         D      6.1    cm
2
Effective piston area           Sd     29     cm
Equivalent volume               Vas    1.8    ltrs
Sensitivity (2.83V/1m)                 84.2   dB
Ratio BL/v(Re)                         1.3              Notes:
IEC specs refer to IEC 60268-5 third edition.
Ratio fs/Qts                   F      141              All Tymphany products are RoHS compliant.

Frequency: 830986
Mechanical Dimensions:830986
Tymphany™ and are trademarks of Tymphany Corporation.  © 2009, Tymphany Corporation.  All rights reserved.     012409