Автомобильный телевизор JBL GX-A604. Инструкция на русском языке

English
Francais
GX-A604/GX-A602/GX-A3001                                                                                     Espanol
power ampli?er                                                                                               Deutsch
Italiano
Русский
???
??
Nederlands
OWNER’S MANUAL
Svenska
Dansk

introduction
THANK YOU for purchasing a JBL  GX-series amplifier. So we can better serve you should you require warranty service, please retain your original
®
sales receipt and register your amplifier online at www.jbl.com.
included items
Speaker-level input harness
GX-Series Amplifier (x 1)     (GX-A602, GX-A3001 x 1)
(GX-A604 x 2)
locAtion And mountinG
Although these instructions explain how to install GX-series amplifiers in a general sense, they do not show specific installation methods that may be
required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the installation yourself. Instead, please ask
your authorized JBL car audio dealer about professional installation.
InstallatIon WarnIngs and tIps
IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal before beginning the installation.
• Always wear protective eyewear when using tools.
•  Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring
harnesses, and that wire routing will not interfere with the safe operation of the vehicle.
• When making electrical connections, make sure they are secure and properly insulated.
• If you must replace any of the amplifier’s fuses, be sure to use the same type of fuse and current rating as that of the original.
2

English
INSTALLATION LOCATION
Amplifiers need air circulation to stay cool. Select a location that provides enough air for the amp to cool itself.
•  Suitable locations are under a seat (provided the amplifier doesn’t interfere with the seat adjustment mechanism), in the trunk, or in any other
location that provides enough cooling air.
• Do not mount the amplifier with the heatsink facing downward, as this interferes with the amplifier’s convection cooling.
• Mount the amplifier so that it will not be damaged by the feet of backseat passengers or shifting cargo in the trunk.
• Mount the amplifier so that it remains dry – never mount an amplifier outside the car or in the engine compartment.
MOUNTING THE AMPLIFIER
NOTE: You may find it more convenient to make all of the connections to the amplifier before you permanently mount it to the vehicle.
1. Select a suitable mounting location as described above.
2. Using the amplifier as a template, mark the locations of the mounting holes on the mounting surface.
3. Drill pilot holes in the mounting surface.
4.  Attach the amplifier to the mounting surface with four appropriate mounting screws of your own choice. We suggest using #8 Phillips-head sheet
metal screws. Make sure the amplifier is mounted securely.
www.jbl.com     3