Потенциометр DACT CT2-2. Инструкция на английском языке

Page 1 of 3
CT1 and CT2
Audio Attenuators / Volume Controls
OUTLINE DRAWING AND DIMENSIONS
APPROX. DIMENSIONS (mm)
Dim.             Description               CT1       CT1       CT1       CT2       CT2
(1 deck)  (2 decks)  (4 decks)  (2 decks)  (6 decks)
A  Distance between terminal sets         -        17.5    3 x 17.5    14.5    3 x 14.5
2 x 20.0
B  Mounting plane to first terminal set   18        18       18        14        14
C  Total build-in depth                   28       45.5      80.5      42        112
D  PCB width (bottom)                     10        10       10         9         9
E  Total height when mounted on a PCB    36.5      36.5      36.5      36        36
F  PCB diameter (click-house for CT2)     32        32       32        32        32
SPECIFICATIONS
MAXIMUM RATINGS

Page 2 of 3
Note             Parameter             (conditions / comments)       Value        Unit
CT1 & CT2
1  Switching capacity                     (resistive load)         2V/2A       AC/DC
24V/0.6A
42V/0.4A
1  Power dissipation                 (each resistor, CT1 / CT2)   125 / 100     mW
1  Operating ambient temp. range                                 -25 to +70    deg.C
1  Storage temperature range                                     -40 to +85    deg.C
MECHANICAL CHARACTERISTICS
Note            Parameter              (conditions / comments)       Value        Unit
CT1 & CT2
Number of positions                                               24
Indexing angle                                                    15         deg.
Switching function                                             Shorting
Gold plating, contacts                   (hard-gold)              3          um
Gold plating, wiper                      (hard-gold)              8          um
2  Mechanical life                                                > 25,000     cycles
Switching torque                                                 1.5         Ncm
Nut tightening torque                                         Max.  300      Ncm
DC ELECTRICAL  CHARACTERISTICS
Note            Parameter             (conditions / comments)       Value         Unit
CT1 & CT2
Total resistance range                                   10,20,50,100,250,  kOhm
500 (500:CT2 only)
3   Total resistance accuracy                (new)                  0.1          %
Attenuation steps                     (source output     0,2,4,6,8,10,12,14,1   dB
impedance = 0),   6,18,20,22,24,26,28,
(load input impedance =  30,32,34,38,42,46,5
infinite)           0,60,infinite
3  Attenuation accuracy                      (new)               +/- 0.05        dB
3  Matching accuracy (tracking)             (2 decks)            +/- 0.05        dB
4  Contact resistance                        (new)               Max. 0.01      ohm
Contact capacitance                 (adjacent contacts)          1            pF
Series inductance                (10 kOhm, input to ground)   Max. 0.2        uH
AC ELECTRICAL  CHARACTERISTICS
Note            Parameter              (conditions / comments)       Value        Unit
CT1 & CT2
4   -3dB bandwidth                        (10k, A = -6dB)            50         MHz
5  Noise voltage                     (10k, input to ground pin)     12.8       nV/Hz
6  Total harmonic distortion           (A = -6dB, fo = 1kHz)    Max. 0.0001      %
Notes
1  Exposure to maximum rating conditions for extended periods of time may affect device reliability
2  One cycle is defined as a full rotation from one end stop to the other and return
3  Typical values at +25 deg. C ambient temperature. Output (pin 2) unloaded
4  Measuring probe input capacitance 1 pF
5  Theoretical value for an ideal 10k resistor
6  Measured with Panasonic Audio Analyzer VP-7722P

Page 3 of 3
ORDERING INFORMATION
Part number  Description
CT1-xxxk-1     Mono (1 deck) version of CT1 in 10k, 20k,
50k, 100k or 250kOhm
CT1-xxxk-2     Stereo (2 decks) version of CT1 in 10k, 20k,
50k, 100k or 250kOhm
CT1-xxxk-4     Balanced stereo (4 decks) version of CT1 in
10k, 20k, 50k, 100k or 250kOhm
CT2-xxxk-2     Stereo (2 decks) version of CT2 in 10k, 20k,
50k, 100k, 250k or 500kOhm
CT2-xxxk-6     A/V (6 decks) version of CT2 in 10k, 50k,  or
100k ( 20k, 250k and 500kOhm on special
request)
CT-knob1       Stainless steel knob for CT1, CT2 and CT3,
raw steel look, 25 mm (1”) diam.
CT-ext1/S      Shaft extension kit. Version with short
extension shaft (200mm = 7.87”)
CT-ext1/L      Shaft extension kit. Version with long
extension shaft (400mm = 15.75”)
CT-conn1       Gold plated connector for CT1 and CT2.
Includes 3 pcs 30cm (12”) long wires
CT1 / CT2 schematic             CT1-mod1/xxxk  Resistor kit for modifying the attenuation
curve of CT1 (resistors for 1 deck)
NOTE.  xxxk refers to the resistance 10k,
20k, 50k, 100k, 250k or 500kOhm