Радиоприемник VITEK VT-3588. Инструкция на русском языке

EINO?OEOE? II YENIEOAOAOEE
MANUAL  INSTRUCTION
MULTI-FUNCTION DIGIT DISPLAY 4 BAND RADIO
IIIAIOOIEOEIIAEUIUE 4-O AEAIACIIIUE
OEO?IAIE ?AAEII?EAIIEE
IIAAEU VT-3588

ENGLISH
PRECAUTION
1. Avoid fierce lash, or falling into the ground.
2. Do not put the radio in the place where is under sunshine, hot or humid.
3. Keep magnetic tape, magnetic card and other magnetic record software
away from the speaker, in order to avoid that the record is erased or there is
noise in the magnetic tape.
4. If there are sundry matters in the radio, please use the radio after check-
ing by qualified technician.
5. Each index of the radio is adjusted well, so please do not adjust the com-
ponents in the radio.
6. Use a soft cloth with detergent to clean the cabinet. Please do not use
alcohol, thinner and other strong detergent to clean it.
INSTALL BATTERY
1. The radio uses two AAA1.5V batteries, please
put the new batteries in the battery slot according
to the polarity.
2. When the sound is distortion or the volume is
faint, please change the batteries in time.
Suggestion: Please use high quality battery or
alkaline battery for the digit display radio of the
radio.
Attention:
1. Do not use new and old or different type batteries together.
2. In order to prevent the leakage of the electrolysis liquid or danger of
explosion, do not charge, heat or resolve the batteries.
3. If you do not use the radio for a long time, please take out the batteries,
lest the leakage of the battery corrodes the parts in the radio.
4. If the battery leaks, you must change the battery after cleaning the slot
with soft cloth.
APPEARANCE DIAGRAM & FUNCTION INDICATION
1. Display screen   9. Timing switch button  ton
2. Power switch     10.Sleep timing turn off  15.Time set button
3. Tuning indicator  button            16.Supporting rack
4. Hand belt        11.Timing switch on set  17.Telescopic antenna
5. FM band button   button             18.Volume control
6. Tuner            12.Minute adjustment  19.Earphone socket
7. AM band button   button             20.Battery slot
8. 12/24 hour change-  13.Band switch
over                14.Hour adjustment but-
2

ENGLISH
LCD EXPLANATION
1. Afternoon time indication  6. MW frequency unit indication
2. MW band indication       7. FM frequency unit indication
3. SW band indication       8. Timing turn on function indication
4. FM band indication       9. Sleep timing turn off indication
5. SW frequency unit indication  10.Time or frequency indication
RECEPTION OPERATION
1. Move the Power switch (2) to the position of ON, the radio begins to work.
Move the Power switch (2) to the position of OFF, the radio is turned off, the
time displays on the display screen.
2. Turn the Volume control (18) to adjust to the optimum volume.
3. Press the FM button (5) to receive FM station program.
4. Press the AM button (7) to receive AM band program. Move the Band
switch (13) to select MW, SW1/SW2 station program.
5. Turn the Tuner (6) to watch the frequency on the display, you can search
your desired station program.
3