Радиоприемник VITEK VT-3585 SR. Инструкция на русском языке

11.03.2009   17:04:060
3585IM_new.indd   1
3585IM_new.indd   1                                         11.03.2009   17:04:

11.03.2009   17:04:08
3585IM_new.indd   2M_new.indd   2                         11.03.2009   17:04:08

English
RECEIVER DIAGRAM           POWER
SPECIAL FUNCTIONS          Installing the batteries
1.   MW/SW Band selector   1.   This radio receiver can use three
2.   Electronic lock button  UM1 type batteries for power.
3.   Power indicator          They must be inserted into the
4.   Settings regulator      battery compartment, following
5.   Radio settings indicator  polarity.
6.   Headphones jack       2.   If the sound weakens or static
7.   Sleep timer button      is heard when listening, new
8.   Setting the hour\increasing the  batteries should be installed.
volume                     Attention!
9.   Setting the minute/lowering the   1.   Do not use new and old batteries
volume                    or batteries of different types at
10.   Receiver On/Off button  the same time.
11.   Display              2.   To avoid spillage of electrolyte
12.   Backlight button       and threat of dangerous
13.   Current time/alarm setting button  explosion, it is not recommended
15.   Telescopic antenna     to recharge, heat, or take
16.  220 V AC power connection using   batteries apart.
the provided cable      3.   If you are not planning to use
17. Carrying handle          the receiver for a long period
18.  Battery compartment     of time, don’t forget to remove
the batteries, otherwise the
DISPLAY INDICATIONS          electrolyte may spill and damage
1.   Sleep timer indicator   parts of the device.
2.   Electronic lock indicator
3.   Reception indicator   AC power
4.   FM indicator          1.   Plug in the power cord to the AC
5.   AM indicator            power outlet.
6.   Station frequency indicator  2.   If the device is connected to
7.   MW band indicator       power, the batteries automatically
8.   FM/SW band indicator    turn off.
9.   Volume level indicator
10.   Volume adjustment indicator  PREPARING THE RECEIVER FOR
11.   Volume meaning indicator  OPERATION
12.   World time indicator  Checking the activation of the
13.   Current time indicator  electronic lock before turning the
14.   Alarm indicator      receiver on
15.   Current time mode indicator  1.   If after installing the batteries, the
symbol    appears on the
3
11.03.2009   17:04:080
3585IM_new.indd   3
3585IM_new.indd   3                                         11.03.2009   17:04: