Радиочасы SONY ICF-DS11IP. Инструкция на английском языке

4-150-697-42(1)   WARNING                                     Disposal of waste batteries   Compatible iPod/iPhone           When Daylight Saving Time (summer time)   Notes                         If the time in the display is
(applicable in the European
?  Do not attempt to charge the battery.
begins, the clock does not employ the
To reduce the risk of fire or electric shock, do   Union and other European   models                        Daylight Saving Time automatically.   ?  If you are not going to use the remote   incorrect after the battery is
not expose this apparatus to rain or         countries with separate     Compatible iPod/iPhone models are as follows.   ?  Make sure the clock is set correctly.  commander for a long time, remove the battery   changed (Reset)
moisture.                                    collection systems)         Update your iPod/iPhone to use the latest   ?  Press and hold CLOCK and SNOOZE/DATE/  to avoid any damage that may be caused by   Press the reset button with a pointed device. The
To reduce the risk of fire, do not cover the   This symbol on the battery or on the packaging   software before you use it.  SLEEP OFF simultaneously for at least    leakage and corrosion.  reset button is in the small hole located in the
ventilation of the apparatus with newspapers,   indicates that the battery provided with this                2 seconds to activate the Automatic DST                                battery compartment (see Fig. ?).
tablecloths, curtains, etc. And do not place lighted   product shall not be treated as household waste.      function.
candles on the apparatus.          On certain batteries this symbol might be used in                                                              About the backup
To reduce the risk of fire or electric shock, do not   combination with a chemical symbol. The
expose this apparatus to dripping or splashing,   chemical symbols for mercury (Hg) or lead (Pb)            Connecting the aerial                 battery
and do not place objects filled with liquids, such   are added if the battery contains more than
as vases, on the apparatus.        0.0005% mercury or 0.004% lead.                                          To connect the AM loop                To keep accurate time, this unit contains a
CR2032 battery as a backup power source.
Do not install the appliance in a confined space,   By ensuring these batteries are disposed of   iPod touch    iPod touch  iPod touch    aerial  The battery keeps the clock and the alarm
such as a bookcase or built-in cabinet.  correctly, you will help prevent potentially   3rd generation  2nd generation  1st generation            operating in the event of a power interruption.
Personal Audio                                                          Do not expose the batteries (battery pack or   human health which could otherwise be caused                 The shape and the length of the aerial is designed   Note for customers in Europe
negative consequences for the environment and
to receive AM signals. Do not dismantle or roll up
The clock is preset at the factory, and its memory
batteries installed) to excessive heat such as
by inappropriate waste handling of the battery.
the aerial.
is powered by the preinstalled Sony CR2032
sunshine, fire or the like for a long time.
The recycling of the materials will help to
Docking System                                                          As the main plug is used to disconnect the unit   conserve natural resources.  iPod nano  iPod nano  3rd generation   1  Remove only the loop part from the   battery. If the “0:00” appears in the display when
the unit is connected to AC outlet for the first
iPod nano
from the mains, connect the unit to an easily
plastic stand.
In case of products that for safety, performance or
time, the battery may be weak. In this case,
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug   data integrity reasons require a permanent   5th generation    4th generation    (video)  2  Set up the AM loop aerial.  consult a Sony dealer. The preinstalled CR2032
(video)
connection with an incorporated battery, this
(video camera)
battery is considered part of the product, and is
from the AC outlet immediately.    battery should be replaced by qualified service                                                                covered by the warranty.
The unit is not disconnected from the AC power   staff only.                                                                                      You are required to show “Note for customers in
source (mains) as long as it is connected to the   To ensure that the battery will be treated properly,                                           Europe” (in this instruction) to a Sony dealer in
hand over the product at end-of-life to the
Operating Instructions                                                  wall outlet, even if the unit itself has been turned   applicable collection point for the recycling of                                           order to validate the warranty for this product.
off.
To know when to replace the
The nameplate and important information   electrical and electronic equipment.  iPod nano    iPod nano
iPod
concerning safety are located on the bottom   For all other batteries, please view the section on   2nd generation   1st generation  5th generation    battery
(aluminum)
exterior.                          how to remove the battery from the product                    (video)    3  Insert the AM aerial terminal into the   When the battery becomes weak, “?” appears in
safely. Hand the battery over to the applicable                                                                the display.
CAUTION                            collection point for the recycling of waste                                AM ANTENNA jack on the rear of the   If a power interruption occurs while the battery is
Danger of explosion if battery is incorrectly   batteries.                                                    unit.                               weak, the current time and alarm will be erased.
replaced. Replace only with the same type.  For more detailed information about recycling of                                                      Replace the battery with a Sony CR2032 lithium
Notice for customers: the following   this product or battery, please contact your local                                                          battery. Use of another battery may cause a fire or
information is only applicable to equipment   Civic Office, your household waste disposal                                                         explosion.
sold in countries applying EU directives  service or the shop where you purchased the   iPod    iPod    iPod classic                              To replace the battery
The manufacturer of this product is Sony   product.                        4th generation    4th generation
Corporation, 1-7-1 Konan Minato-ku Tokyo,    If you have any questions or problems concerning   (color display)                                   1  Keep the AC plug connected to the AC
ICF-DS11iP                                                              108-0075 Japan. The Authorized Representative   your unit, please consult your nearest Sony dealer.                                                 outlet, remove the screw that secures the
for EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,                                                                                                      battery compartment lid at the bottom of
Germany. For any service or guarantee matters   Features                                                                                            the unit using a screwdriver, and open
please refer to the addresses given in separate                                                             To remove the AM loop aerial            the lid (see Fig. ?).
service or guarantee documents.    ?   Compatible with iPod/iPhone           iPod mini                      Pull the AM aerial terminal while pushing up the   2  Insert a new battery in the battery
?   Wake or Sleep to iPod/Radio/Buzzer                                   terminal clamp.                         compartment with the ? side facing up
?   Easy to set A-B alarm                           iPhone 4  iPhone 3GS
Precautions                        ?   2-5-7day alarm                                                                                             3  Close the battery compartment lid and
©2010 Sony Corporation          Printed in China                                                                                                                                                                            (see Fig. ?).
?  Operate the unit on the power source specified   ?   LCD Brightness control                                                                      secure it with the screw (see Fig. ?).
?   MEGA BASS
in “Specifications.”             ?   MEGA Xpand
?  Since a strong magnet is used for the speaker,   ?   Wireless Remote Commander                                                                 4  Press iPod & iPhone ?, RADIO
keep personal credit cards using magnetic coding                                                                                                  BAND, AUDIO IN or SNOOZE/DATE/
or spring-wound watches away from the unit to                                                                                                     SLEEP OFF to turn “?” off in the
prevent possible damage from the magnet.  Specifications                  iPhone 3G  iPhone                                                       display.
?  Do not leave the unit in a location near a heat                       Notes
source such as a radiator or airduct, or in a                          ?  In these Operating Instructions, “iPod” is used                       Note
place subject to direct sunlight, excessive dust,   Time display        as a general reference to functions of iPod on an   Adjusting the AM loop aerial  When you replace the battery, do not disconnect
mechanical vibration, or shock.  24-hour system                         iPod or iPhone, unless otherwise specified by   Find a place and an orientation that provide good   the plug from the AC outlet. Otherwise, the
?  Allow adequate air circulation to prevent internal   Section for iPod  the text or illustrations.        reception.                            calendar, current time, alarm and station presets
heat build-up. Do not place the unit on a surface   DC out: 5V         ?  The connector of the unit is for sole use with an   ?  Do not place the AM loop aerial near the unit   will be erased.
(a rug, a blanket, etc.) or near materials (a   MAX: 500mA              iPod. If you use devices that do not match with   or other AV equipment, as noise may result.
curtain) which might block the ventilation holes.  Radio section        the connector, connect to the AUDIO IN jack of   Tip                     ?
?  Should any solid object or liquid fall into the unit,   Frequency range  this unit with the supplied audio connecting   Adjust the direction of the AM loop aerial for best
unplug the unit and have it checked by qualified                        cable.                            AM broadcast sound.
personnel before operating it any further.  Band  Frequency  Channel   ?  Sony cannot accept responsibility in the event
?  To clean the casing, use a soft cloth dampened         step            that data recorded to an iPod is lost or damaged
with a mild detergent solution.                                         when using an iPod connected to this unit.
?  Never touch the wire of the external FM aerial   FM  87.5 MHz – 108 MHz  0.05 MHz                        Preparing the remote
during a thunderstorm. Furthermore,   AM  531 kHz – 1 602 kHz  9 kHz                                      commander
immediately disconnect the AC power cord                               Troubleshooting
from the radio.                  General                                                                  Before using the remote commander for the first
NOTES ON LITHIUM BATTERY           Speaker     1                         Should any problem persist after you have made   time, remove the insulation film.
the following checks, consult your nearest Sony
?  Wipe the battery with a dry cloth to assure a   Approx. 5.7 cm (2  /4 inches) dia. 6 ?  dealer.                                                 ?
good contact.                    Input                                                                                                                      Reset button
?  Be sure to observe the correct polarity when   AUDIO IN jack (o 3.5 mm stereo minijack)  The clock flashes “0:00” due to a power
installing the battery.          Power output                          interruption.
?  Do not hold the battery with metallic tweezers,   3.5 W + 3.5 W (at 10% harmonic distortion)  ?  The battery is low. Replace the battery. Remove
otherwise a short-circuit may occur.  Power requirements                the old battery and install a new one.                                         CR2032
Disposal of Old Electrical &   230 V AC, 50 Hz                   The alarm of radio, iPod or buzzer does not   To know when to replace the
For clock back up: 3V DC, CR2032 battery (1)
Electronic Equipment (Applicable                                 sound at the preset alarm time.    battery
in the European Union and other   Dimensions                     ?  Check that alarm “A” or alarm “B” is properly   With normal use, the battery (CR2025) should
European countries with separate   Approx. 290.5 mm ? 152.0 mm ? 139.5 mm (w/h/d)    displayed.
1
15
3
collection systems)        (11  /8 inches ? 5  /16 inches ? 5  /2 inches)    The alarm of radio or iPod is activated but no   last for about six months. When the remote
including projecting parts and controls  sound comes on at the preset alarm time.  commander no longer operates the unit, replace
This symbol on the product or on its packaging   Mass                    ?  Check the alarm volume setting.  the battery with a new one.
indicates that this product shall not be treated as   Approx. 2.0 kg (4 lb 7 oz) including power supply
household waste. Instead it shall be handed over   unit                  There is no sound from the iPod.                                          ?
to the applicable collection point for the recycling   Supplied accessories  ?  Make sure the iPod is securely connected.
of electrical and electronic equipment. By   Remote commander (1)        ?  Adjust the VOLUME.
ensuring this product is disposed of correctly, you   AM loop aerial (1)  The iPod cannot be operated with this unit.
will help prevent potential negative consequences   Audio connecting cable (1)                                            ?
for the environment and human health, which   Universal Dock Adapter for iPhone (1)  ?  Make sure the iPod is securely connected.
could otherwise be caused by inappropriate waste   Universal Dock Adapter for iPhone 3G & iPhone   The iPod cannot be charged.  CR2025
handling of this product. The recycling of   3GS (1)                     ?  Make sure the iPod is securely connected.
materials will help to conserve natural resources.   Universal Dock Adapter for iPhone 4 (1)
For more detailed information about recycling of
this product, please contact your local Civic   Design and specifications are subject to change
Office, your household waste disposal service or   without notice.
the shop where you purchased the product.
Applicable accessory: Remote Commander.

?  To activate Automatic DST/Summer Time   2  Press and hold the desired STATION     Universal Dock Adapter  On copyrights                        ? Setting the Buzzer Alarm        2  Press SLEEP to set the sleep timer
adjustment again, press and hold CLOCK and   SELECT   PRESET 1 to 5 buttons until                         iPhone, iPod, iPod classic, iPod nano, and iPod                            duration.
SNOOZE/DATE/SLEEP OFF at the same time                                                                    touch are trademarks of Apple Inc., registered in   1  Perform steps 1 to 8 in “To set the alarm.”
STATION  SELECT  PRESET                       at least 2 seconds.                 the preset number display changes from                                the U.S. and other countries.         2  Press   ALARM SET A or B to select   Each time you press SLEEP, the duration (in
“ ” and “On” appear in the display to show that   flashing to fully lit.   ?                              “Made for iPod,” and “Made for iPhone” mean   “BUZZER” alarm mode.         minutes) changes as follows:
Automatic DST/Summer Time adjustment has   Example:  To preset FM 89.8 MHz onto the   ?          ?        that an electronic accessory has been designed to                                90   60  30  15
been activated. The display returns to the clock.  preset 1 button.    Notes                              connect specifically to iPod or iPhone,   The setting is entered.                      OFF
?  When inserting an iPod into the unit, be sure to   respectively, and has been certified by the   3  If “A” or “B” does not appear in the   The display returns to clock mode for about
display, press   ALARM SET A or B
Setting the clock manually                                                use the universal dock adapter supplied with your   developer to meet Apple performance standards.   again.  4 seconds after you have finished the duration
iPod or commercially available from Apple Inc.
Apple is not responsible for the operation of this
setting and released SLEEP, and then the sleep
?  The connector of the unit is exclusively for use   device or its compliance with safety and   The buzzer will sound at the set time.
1  Plug in the unit.                                                      with an iPod. If you use a device that does not   regulatory standards. Please note that the use of   Note   timer starts.
The unit plays for the duration you set, and
2  Press and hold CLOCK until the year                                    match the connector, connect it to the AUDIO   this accessory with iPod or iPhone may affect   The volume cannot be set for the buzzer alarm.  then stops.
flashes in the display.                                                IN jack of this unit with the supplied audio   wireless performance.
connecting cable.
3  Press TIME SET + or – repeatedly to set        ?                      ?  Sony cannot accept responsibility in the event                        To confirm an alarm time setting  To turn off the unit before the preset
Press TIME SET + or –. The setting will be
time
the year.                                                              that data recorded on an iPod is lost or damaged  Setting the alarm     displayed for about 4 seconds.
4  Press CLOCK.                                                           when using an iPod connected to this unit.  This unit is equipped with 3 alarm modes—iPod,   To change an alarm setting  Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
the remote) or OFF/ALARM RESET (OFF on the
5  Repeat steps 3 and 4 to set the month,                                ?  For details of environmental conditions for   radio and buzzer. Before setting the alarm, make   Press and hold TIME SET + for at least 2 seconds   remote).
operating your iPod, check the website of Apple
sure to set the clock (see “Setting the clock for the
day, hour and minute, and then press                                   Inc.                              first time”).                         to move the alarm time forwards. Press and hold
FM wire aerial     CLOCK.                                                                                                                                         TIME SET – for at least 2 seconds to move the   To change the sleep timer setting
You can press SLEEP repeatedly to select the
The seconds start incrementing from zero.  After a while, the display will return to the   1  Attach the adapter for your iPod/iPhone.  To set the alarm  alarm time back.       desired sleep timer setting even after the sleep
current time.
Notes                                 To preset another station, repeat these steps.   2  Insert your iPod/iPhone into the   1  Press and hold   ALARM SET A or B.   When you release the button, the changed time   timer has been activated.
?  If you do not press any button for about    To change the preset station, tune into the   connector of the unit.  “WAKE UP” appears and the hour flashes in   will flash for about 2 seconds. To change the
1 minute while setting the clock, the clock                                                                 the display.                        alarm time again, press TIME SET + or – within   To deactivate the sleep timer
AC power cord     setting will be canceled.           desired station and hold down the STATION                             2  Press TIME SET + or – repeatedly until   these 2 seconds, otherwise the setting change will   Press SLEEP repeatedly to set the sleep timer to
SELECT   PRESET 1 to 5 button. The new
? A calendar is installed in this unit. When the   station will replace the previous station on the                                               be fixed as displayed.            “OFF” in step 2.
date is set, the day of the week is automatically   preset button.                                          the desired hour appears.           To doze for a few more minutes
displayed.                                                                                                  To cycle the hour rapidly, press and hold TIME   Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
MON = Monday, TUE = Tuesday,     Tuning in to a preset station                                              SET + or –.                         the remote).                      Other useful functions
WED = Wednesday, THU = Thursday,                                                                          3  Press   ALARM SET A or B.          The sound turns off but will automatically come
FRI = Friday, SAT = Saturday, SUN = Sunday   1  Follow steps 1 to 2 in “Manual tuning”                      The minute flashes.                 on again after about 10 minutes.   To get the MEGA Xpand effect
and select the AM or FM band.
To display the year and date       2  Press one of the STATION   SELECT                                     4  Repeat step 2 to set the minute.   You can change the snooze time by pressing   Press MEGA Xpand. “MEGA Xpand” appears in
the display. You can get the effect of expansion of
5  Press   ALARM SET A or B.
SNOOZE/DATE/SLEEP OFF (SNOOZE on the
The STATION   SELECT   PRESET 3, VOLUME + and iPod & iPhone ? buttons have a    Press SNOOZE/DATE/SLEEP OFF (SNOOZE on    PRESET buttons where the desired                            The days of the week flash.         remote) repeatedly within 4 seconds.  the sound field. To return to normal sound, press
the button again.
the remote) once for the date, and press it again
tactile dot.                                                                                                  station is stored.                                                    6  Repeat step 2 to set the days of the week.  The maximum length of the snooze time is
for the year.                                                                                                                                     60 minutes.
After a few seconds, the display will change back   The preset station can also be selected by                You can select the days from the following   To stop the snooze timer, press OFF/ALARM   To reinforce the bass sound
to the current time automatically.    PRESET + or – on the remote.       3  Press iPod & iPhone ?.            three options:                      RESET (OFF on the remote).        Press MEGA BASS. “MEGA BASS” appears in the
3  Adjust the volume using VOLUME + or –   The iPod begins to play automatically.  Every day: MON TUE WED THU FRI SAT                            display. You can get the effect of bass of high
quality sound. To return to normal sound, press
SUN
Setting the brightness                (VOL + or – on the remote).          You can operate the connected iPod by this   Week day: MON TUE WED THU FRI   To stop the alarm           the button again.
Press OFF/ALARM RESET (OFF on the remote)
unit or the buttons on iPod.
Week end: SAT SUN
of the display                     –Auto preset tuning                   4  Adjust the volume using VOLUME + or –   7  Press   ALARM SET A or B.  to turn off the alarm.
The alarm will sound again at the same time the
1  Follow steps 1 to 2 in “Manual tuning”   (VOL + or – on the remote).    The alarm mode setting is entered.  next day.                         Connecting external
Three levels of brightness are available by pressing
BRIGHTNESS.                         and select the AM or FM band.       To                Press           8  Press TIME SET + or – repeatedly until   To deactivate the alarm     equipment
2  Press and hold RADIO BAND until “AP”   Turn off the iPod  OFF, or press and   the desired alarm mode flashes.  Press   ALARM ON/OFF A or B to turn off the
flashes in the display.                               hold iPod &       You can choose one of 5 settings: “iPod”,   alarm A or B indicator from the display.  To listen to sound
Even if you set the level of brightness to Low, it   3  Press DISPLAY/MEMORY.               iPhone ?          “FM1”, “FM2”, “AM” or “BUZZER.” Set the                               1  Connect the AUDIO IN jack of the unit
will be changed to Middle, while alarm is   The unit automatically presets the available   Pause playback  iPod & iPhone   alarm mode as follows:  To activate the alarm               to the line out jack or headphone jack of
occurring.                            channels in order.                                    ?                 – iPod: see “? Setting the iPod alarm.”  Press   ALARM ON/OFF A or B to turn on the   the external equipment using the audio
–  FM1, FM2 or AM: see “? Setting the radio
Tip                                                      To resume play,    alarm.”                            alarm A or B indicator in the display.  connecting cable (supplied).
press it again.
Operating the radio                To stop auto preset tuning, press OFF/ALARM   Go to the next track  ? (forward)  – BUZZER: see “? Setting the buzzer alarm.”  Notes
?  With the alarm mode is set to iPod, when the
RESET.
–Manual tuning                                                            Go back to the previous   ? (backward)*  ? Setting the alarm of iPod     alarm time met, if iPod is not attached to the
To display the preset number and       track                             1  Perform steps 1 to 8 in “To set the alarm.”  unit, the alarm sound will be the buzzer.
The ? and VOL + buttons have a tactile dot.            1  Press RADIO BAND to turn on the radio.  frequency of the current station  Locate a point while   ? (forward) or   2  Press   ALARM SET A or B to select   ?  The alarm function works as usual on the first
and last day of Daylight Saving Time (summer
2  Press RADIO BAND repeatedly to select   Press DISPLAY/MEMORY once for the preset   listening to the sound  ? (backward)   alarm mode for “iPod.”  time). As a result, if the Automatic DST/
the desired band.               number, and press it again for the frequency.            while playing and   “VOLUME” appears in the display.   Summer Time adjustment is set and the alarm
If you press DISPLAY/MEMORY once only, the
hold it until you
Setting the clock for              “ ” is displayed from the beginning of Daylight   Each press changes the band as follows:  display shows the preset number for about   find the point.  3  Press TIME SET + or – to adjust the   is set at a time skipped when the Daylight   Audio connecting cable
Saving Time (summer time) and disappears at the
Saving Time begins, the alarm is skipped; if the
FM2
FM1
(supplied)
AM
2 seconds, then changes to the frequency.
volume.
the first time                     end of Daylight Saving Time (summer time)                               After a few moments, the display returns to the   Locate a point while   ? (forward) or   4  Press   ALARM SET A or B.  alarm is set to a time that overlaps when   To external
automatically.
observing the display
Daylight Saving Time ends, the alarm will
? (backward)
This unit is preset to the current date and time at   Automatic DST/Summer Time adjustment is   FM1 and FM2 are the same frequency bands.  current time.            in pause and hold   The setting is entered.            sound twice.                         equipment
the factory, and is powered by the backup battery.   based on GMT (Greenwich Mean Time).  3  Press TUNING + or – (TUNE + or – on                                    it until you find   5  If “A” or “B” does not appear in the   ?  If the same alarm time is set for both alarm A   2  Press AUDIO IN to display “AUDIO IN.”
All you need to do the first time is just plug it in   Area number 0:      the remote) to tune into the desired   Improving the reception                           the point.        display, press   ALARM SET A or B    and B, alarm A takes priority.   3  Play the equipment connected to the
and select your time zone.         ?  Daylight Saving Time (summer time) begins at:   station.                                                    Go back to the previous   MENU**                                        ?  If there is no operation while the alarm is   AUDIO IN jack.
1  Plug in the unit.                1:00 AM on the final Sunday of March.  4  Adjust volume using VOLUME + or –   FM:  Extend the FM wire aerial fully to increase   menu             again.                               occurring, the alarm will stop after about
60 minutes.
The iPod will sound at the set time.
The current CET (Central European Time)  ?  Standard time begins at: 2:00 AM on the final   (VOL + or – on the remote).  reception sensitivity.  Select a menu item or a   ? (up)/? (down)**                                                              4  Adjust the volume using VOLUME + or –
appears in the display.           Sunday of October.                     To turn off the radio, press OFF.  AM:  Connect the supplied AM loop aerial to the   track for playback  When using an iPod touch/iPhone       Note on the alarm in the event of a power   (VOL + or – on the remote).
unit. Rotate the aerial horizontally for
2  Press and hold   TIME ZONE for at least   Area number 1:                                                   optimum reception.                  Execute the selected menu  ENTER**  ?  To wake up to music stored in an iPod touch/  interruption         To return to the radio
iPhone, connect the iPod touch/iPhone to the
?  Daylight Saving Time (summer time) begins at:
2 seconds.                        2:00 AM on the final Sunday of March.  Note                                                                   or begin playback                  unit first, follow the steps above to set alarm   In the event of a power interruption, the alarm   Press RADIO BAND.
Area number “1” flashes in the display.  ?  Standard time begins at: 3:00 AM on the final   The FM frequency display is accurate to within   Notes on radio reception  Change to the shuffle mode  MODE  time, and then select the music function.  will work until the battery is totally discharged.   First the preset number, then the frequency of the
0.1 MHz. For example, frequency 88.00 and 88.05
3  Press TIME SET + or – repeatedly to   Sunday of October.             MHz will be displayed as “88.0 MHz.”  ?  Keep digital music players or mobile phones   *  During playback, this operation goes back to   ?  Even if the alarm setting of iPod is complete, if   However, certain functions will be affected as   last station is shown in the display.
away from the AM loop aerial or the FM aerial,
select the number as follows:    Area number 2:                                                            as this may lead to reception interference.  the beginning of the current track. To go back   you turn the iPod touch/iPhone power off   follows:  To return to the iPod
?  Daylight Saving Time (summer time) begins at:   Tuning in to a station                                      to the previous track, press twice.  before inserting the iPod touch/iPhone into the   ?  The backlight will not light up.  Press iPod & iPhone ?.
Area number  Time zone           3:00 AM on the final Sunday of March.  The unit automatically scans AM or FM stations.  ?  When you are listening to the radio with an   ** These operations are available only when using   unit, the alarm of iPod will not work.  ?  If the alarm mode is set to iPod or radio, it will
?  Standard time begins at: 4:00 AM on the final                          iPhone connected to the unit, interference with   the supplied remote commander.                              change to buzzer automatically.  To stop listening
1 (default   Central European Time/  Sunday of October.              1  Follow steps 1 to 2 in “Manual tuning”   radio reception may occur.   Notes                              ? Setting the radio alarm             ?  If OFF/ALARM RESET is not pressed, the alarm   Press OFF/ALARM RESET (OFF on the remote),
setting)   Central European                                             and select the AM or FM band.   ?  When you are listening to the radio while   ?  When placing or removing the iPod, hold the   1  Perform steps 1 to 8 in “To set the alarm.”  will sound for about 5 minutes.  and stop playback on the connected unit.
Summer Time          To cancel Automatic DST/Summer Time                                       charging an iPod, interference with radio   iPod at the same angle as that of the connector                  ?  If “?” appears in the display, the alarm will not
adjustment during the Daylight Saving   2  Press and hold TUNING + or – (TUNE +   reception may occur.                                           2  Press   ALARM SET A or B to select   sound in the event of a power interruption.   Notes
2          Eastern European Time/  Time (summer time) period            or – on the remote).            Tip                                    on this unit, and do not twist or bend the iPod   radio band (“FM1”, “FM2” or “AM”).  Replace the battery if “?” appears.  ?  Refer also to the connected equipment’s manual.
Eastern European     The Automatic DST/Summer Time adjustment   + : scans upward through the frequency bands.  If the FM broadcast is noisy, press MODE until   as connector damage may result.  Preset number flashes in the display.  ?  The snooze function cannot be set during a   ?  The supplied audio connecting cable may not
Summer Time          can be canceled.                        – : scans downwards through the frequency   “MONO” appears in the display, the radio will   ?  Do not carry the unit with an iPod set on the   3  Press TIME SET + or – to select the   power interruption. If the snooze function has   be used with some external equipment. In this
connector. Doing so may cause a malfunction.
0          Western European Time/   Press and hold CLOCK and SNOOZE/DATE/  bands.                       play in monaural and the sound will become   ?  When placing or removing the iPod, hold the   desired preset number corresponding the   already been set and a power interruption   case, use a cord suitable for the external
equipment you are using.
Western European     SLEEP OFF at the same time at least 2 seconds   Scanning starts from the currently-tuned   clearer.            Docking Tray securely with one hand and take                             occurs, the snooze function will not work.  ?  When you listen to the radio with external
Summer Time          while the clock is displayed.           frequency. When a station is received,                                 care not to press the controls of the iPod by   bands or “– –”.         ?  During a power interruption, each alarm will   equipment connected, turn off the connected
“ ” and “OFF” appear in the display to show that   scanning stops.                                                                                 “– –” is the last station received.  sound at the set time only once.
mistake.
4  Press   TIME ZONE to set.       Automatic DST/Summer Time adjustment has   3  Adjust the volume using VOLUME + or –  Operating an iPod        ?  Before disconnecting the iPod, pause playback.  4  Press   ALARM SET A or B.                              equipment to prevent noise. If noise occurs,
Note                               been canceled. The display returns to the clock.                                                                                                   “VOLUME” appears in the display.                                        even when the equipment is turned off,
disconnect and place the external equipment
Though the clock is correctly set at the factory,   Notes                  (VOL + or – on the remote).     You can enjoy audio from iPod by connecting to   To use the unit as a battery charger  5  Press TIME SET + or – to adjust the   Setting the sleep timer  away from the unit.
this unit. To use an iPod, refer to the user’s guide
discrepancies may arise during transport or   ?  Changes to Automatic DST/Summer Time   –Preset tuning     of your iPod.                         You can use the unit as a battery charger.
storage. If necessary, set the clock to the correct   adjustment by the unit (see above) are subject       If you are using an iPhone, iPhone 3G, iPhone   Charging begins when the iPod is connected to   volume.        You can fall asleep to music, etc., using the sleep
time by referring to “Setting the clock manually.”  to circumstances and laws in each country/  You can preset up to 10 stations in FM (5 stations   3GS or iPhone 4, attach the supplied universal   the unit.  6  Press   ALARM SET A or B.  timer. The unit stops playback or radio
region. Should this interfere with desired
The setting is entered.
When Daylight Saving Time           adjustment, cancel the Automatic DST/Summer   in FM1, 5 stations in FM2), and 5 stations in AM.  dock adapter for iPhone, iPhone 3G, iPhone 3GS   Charging status appears in the display on iPod.   7  If “A” or “B” does not appear in the   automatically after a preset duration.
For details, see the user’s guide of your iPod.
or iPhone 4 before connecting.
(summer time) begins                Time adjustment and set the DST display   Presetting a station         The adapter number, ?, ? or ?, is shown on                                 display, press   ALARM SET A or B   1  Press SLEEP while the unit is turned on.
manually as necessary. Customers living in a
“SLEEP” appears and the sleep time flashes in
1  Follow steps 1 to 4 in “Manual tuning”
This model automatically adjusts for Daylight   country/region that does not use Daylight   and manually tune into the station you   the underside of the supplied universal dock     again.                                the display.
Saving Time (summer time) must cancel
Saving Time (summer time).          Automatic DST/Summer Time adjustment   wish to preset.                 adapters. ? is for the iPhone, ? is for the iPhone                         The radio will turn on at the set time.
3G & iPhone 3GS and ? is for the iPhone 4.
before using the unit.                                                 Check the adapter number before use.