Ретро радио SENCOR SRD 020. Инструкция на английском языке

RETRO RADIO                                                          USER'S MANUAL
SRD 020                                                                                     EN

Important safety conditions    EN
CAREFULLY READ THIS USER'S MANUAL BEFORE PUTTING THE DEVICE INTO OPERATION. KEEP IT FOR FUTURE USE.
RECORD THE MODEL NUMBER AND THE SERIAL NUMBER. SEE THE LABEL ON THE REAR COVER AND PROVIDE THIS
INFORMATION TO YOUR VENDOR IN THE EVENT THAT YOU REQUIRE REPAIRS.
1.  Important safety conditions
The lightning symbol located in a frame formed    The exclamation mark symbol located inside
by a equilateral triangle informs the user about the   an equilateral triangle informs the user about
existence of an uninsulated "dangerous voltage" inside    important instructions for operation and
the device, which can have such an intensity as to cause   maintenance found in the documentation that
injury by electrical shock.                    comes with the device.
–   The power plug is used as a disconnecting device, which must for this reason remain easily accessible.
–   Do not expose the device to the effects of dripping or sprayed water and do not place objects filled with a liquid
(e.g. vases) on the device.
–   The device's connector is used as a disconnecting device, which must for this reason remain easily accessible.
–   Remember to always disconnect the power plug from the power socket before disconnecting the power cable from
the rear side of the device.
–   An open flame must not be placed on the device, e.g. burning candle.
WARNING:
To prevent a fire hazard or injury by electric shock, do not expose the device to rain or humidity. Never attempt to open
the case of the device – there is dangerously high voltage inside; have all repairs carried out by a qualified service centre.
1.   Please read the instructions
You should read all safety and operating instructions before you start using the device. You should keep the safety and
operating instructions for future reference. All warnings shown on the product and included in the user's manual must
be adhered to. You should proceed according to all operating instructions.
2.  Cleaning
Before cleaning this device, disconnect it from the power socket. Do not use liquid cleaning agents or cleaning agents
in sprays. Use a damp cloth for cleaning.
3.  Accessories
Only use accessories recommended by the manufacturer, because non-recommended accessories may lead to
a hazardous situation.
4.  Water and humidity
Do not use this product near water – for example near a bath tub, washbasin, kitchen sink or laundry containers,
in damp underground environments or near swimming pools, etc.
5.  Additional information
Do not place this product on an unstable cart, pedestal, stand, bracket or table. The product could fall and cause serious
injury to children or adults, or could be seriously damaged. Only use the product with a cart, pedestal, stand or table
recommended by the manufacturer or sold together with the device. Any mounting of the product must be carried out
according to the manufacturer's instructions and the mounting accessories recommended by the manufacturer should
be used.
EN 1
2016                                                                           08/2016

EN      Important safety conditions
6.  Ventilation
The cut-outs and openings in the case of the device are used to ventilate the device and to provide for the reliable
operation of the device and its protection against overheating – these openings must not be blocked or covered. These
openings must never be blocked by placing the device on a bed, sofa, rug or other similar surface. This device should
not be located in a closed-off area such as for example bookshelf or shelf, if sufficient ventilation is not provided for or
the instructions of the manufacturer are not followed. The ventilation must not be impeded by covering the ventilation
openings with objects such as newspapers, tablecloths, curtains, etc.
7.  Power supply
This device may only be powered by the source of energy indicated on the type label. If you are not certain about the
parameters of the power sources in your home, contact your retailer or a local energy company. Devices designed for
battery operation or other power sources - see user's manual.
8.  Grounding or polarisation
This product may be equipped with a polarised plug for alternating current (the plug has one pin that is wider than the
others). This plug can be inserted into the power socket in only one way. This is a safety measure. If the plug does not
fully fit into the socket, try turning the plug. If it is still not possible to insert the plug into your socket, contact a qualified
electrician and request your wall sockets to be changed for a suitable type. Do not negate the safety purpose of the
polarised plug.
9.  Protection of the power cord
Power cords should be lead in such a way that they are not stepped on or that no items are placed on or under them
– at the same time it is important to take special care when handling power cord plugs, power sockets and in places
where power cords exit devices.
10.  Lightning thunderstorms
For increased protection during a lightning thunderstorm or for longer periods when the device will not be used,
disconnect the power cord from the power socket. In this way you will prevent damage to the device caused by
atmospheric electricity or by impact on the power lines.
11.  Overload
Do not overload the power socket, extension cords or integrated sockets, because this could cause a fire or injury by
electric shock.
12.  Entry of items or liquids
Never insert any foreign items into this device through any openings because they could come into contact with points
with dangerous voltage levels or cause a short circuit of parts, which could cause a fire or injury by electric shock. Never
pour liquids into this device.
13.  Damage requiring repairs
Under the following circumstance disconnect the device from the power socket and contact a qualified service centre:
a)      If the power cord or power plug is damaged.
b)      If a liquid was poured on to the device or an item entered into the device.
c)      If the device was exposed to rain or water.
d)      If the device is not working normally according to the user's manual. Only set the elements described in the
user's manual as incorrect settings of other elements may result in damage and often will require extensive repairs
by a qualified technician to return the device to normal working condition.
e)      If you dropped the device on to the floor or if it has been damaged in any other way.
f)   If the device is evidently behaving differently, then repairs are necessary.
14.  High temperature
This device must be located away from sources of heat such as heaters, convection heaters, stoves or similar
appliances (including amplifiers) that produce heat.
2 EN
2016                                                                          08/2016