Часы с радиоприёмником HYUNDAI H-1526. Инструкция на русском языке

H-1526
ALARM CLOCK RADIO                         РАДИОПРИЕМНИК
С БУДИЛЬНИКОМ
Instruction manual          Руководство по эксплуатации

Instruction manual                                                                                                        Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this
manual carefully before connecting, operating and/or adjusting the product and keep the manual
for reference in future.
Description
1.  Display
2.  Dial scale
3.  SLEEP button
4.  ALARM button
5.  TIME button
6.  SNOOZE button
7.  HOUR button
8.  MINUTE button                         1                  2
9.  TUNING regulator
10. AM/FM band switch
11. VOLUME regulator
Not indicated: battery compartment (bottom),
AUTO/OFF/ON switch (left panel)
3  4  5     6     7    8
9         10     11
2                                                                                                                                                  3

Instruction manual                                Instruction manual
Important safeguards                •  Insert the plug into the power supply.
•  The set is now working as an electronic
clock. Figures will blink on the display, showing
•  The instruction manual contains important   that you should set the clock.
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.    Setting the clock
•  Do not hit or drop the unit.
•  Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.  •  Press and hold TIME button.
•  If you are not going to use the unit within   •  Do not release TIME button; press HOUR
a long period of time, remove the batteries to   button or MINUTE button to set the clock
avoid their leakage.                display to the correct time.
•  Do not disassemble the unit yourselves.   •  Release all the buttons when finished the
Refer servicing to qualified service personnel.  setting.
Power supply                        Radio operation
Battery operation                   Tuner operations
•  Insert 1x9V battery (not included) to the   •  Slide AUTO/OFF/ON switch to ON and
terminal inside the battery compartment. Your   turn on the volume.
set will not work normally from the battery   •  Slide AM/FM switch to AM or FM position.
supply, but there is now the advantage that, in   •  Adjust the program using TUNING regulator.
case there is a mains current failure, your clock   •  Use VOLUME regulator to adjust volume
will continue to work. The clock display will not   level.
light up, the clock time will be held in the clock   Antenna
memory by the battery back-up system.This   •  The unit has a built-in ferrite antenna
enables you to move the set from place to place   for AM band, and its recertion is directional.
without re-setting the clock every time. The   Change the orientation of the unit to improve
battery back-up system is only meant to be used   the reception.
from short temporary power failures. For longer   •  The unit is equipped with an FM flexible wire
durations the battery may become exhausted or   antenna on the back of the unit. The antenna
there may be some deviation in accuracy.  should be fully extended for best reception.
•  When the battery is exhausted, it should   Sleep to music
be removed from the set to prevent leakage.   The radio can be set to play and to switch off
If you do not wish to take advantage of the   automatically after a preset time.
battery back-up system, your set will work   •  Slide AUTO/OFF/ON switch to OFF or
normally without a battery. However, if   AUTO position.
disconnected from the mains, the clock figures   •  Press SLEEP button once.
will flash when the mains are re-connected and   •  You can have 59 minutes playing the radio
you must re-set the clock.          to accompany you to sleep.
AС operation                        •  To set for a desired period of sleep
•  The appliance is for household use only.  (maximum 1 hour 59 minutes), simply press
•  Before the first connecting of the appliance   and hold SLEEP button and then press HOUR
check that voltage indicated on the rating label   button or MINUTE button to set the desired
corresponds the mains voltage in your home.  period of the sleep function.
2                                                                          3