Калькулятор CITIZEN SDC-620II. Инструкция на русском языке

SDC-620II
HDBMD492139 XXX

*  POWER SUPPLY           English
CITIZEN model SDC-620II is a dual-powered (high power solar +
back-up battery) calculator operative under any lighting conditions.
-Auto power-off function-
The calculator switches the  power off  automatically if there has
been no key entry for about 9 minutes.
-Battery change-
If the back-up battery needs to be changed, open the lower cabinet
to remove the old battery and insert a new battery in the indicated
polarity. After changing battery, please use a metal, elliptical object
to press the RESET pad on printed circuit board.
*  KEY INDEX              English
ON
[ C ] : Power on / Clear key   [CE] : Clear entry
[00t0] : Shift-back key.   [M+] : Memory plus key
[M–] : Memory minus key   [+/–] : ±Sign change key
[MU] : Mark-up / Mark-down Key   [GT] : Grand total key
[MRC] : Memory recall key / Memory clear key
[RATE] : Tax Rate Setting Key
STORE
TAX ] : ? Price with Tax key
[ +
? To store tax rate when pressing [RATE] and [+TAX] keys.
RECALL
[ - TAX ] : ? Price without Tax key
? To recall tax rate when pressing [RATE] and [–TAX] keys.
A 0 2 3 F  Decimal place selection switch
– F –   Floating decimal mode
– 0 – 2 – 3 – Fixed decimal mode
– A –   ADD–mode automatically enters the monetary
decimal in addition and subtraction calculations
5/4   Round up / Round-off / Round-down switch
The Signs Of The Display Mean The Following:
M : Memory     TAX : Amount of tax
– : Minus (or negative)   –TAX : Price excluding tax
E : Overflow-error   +TAX : Price including tax
GT:Grand total   RATE : Tax rate setting
% : Tax rate stored
*  OPERATION EXAMPLES     English
1. Calculation Examples
Before performing each calculation, press the [  ON ] key.
C
Example   Key  operation  Display
A 0 2 3 F  2 x 3 = 6   2 [x] 2 [CE] 3 [=]   GT   6.
7 x 9 = 63   7 [?] [x] 9 [=]     GT   63.
300 x 27% = 81   300 [x] 27 [%]   GT   81.
11.2   x 100% = 20%  11.2 [?] 56 [%]   20.
56                    GT
300+(300x40%)=420  300 [+] 40 [%]   GT   420.
300–(300x40%)=180  300 [–] 40 [%]   GT   180.
1400 x 12% = 168   1400 [x] 12 [%]   GT   168.
6 + 4 + 7.5 = 17.5   6 [+] 4 [+] 7.5 [=]   GT   17.5
5 x 3 ? 0.2 = 75   [ ON  ] 5 [x] 3 [?] 0.2 [=]  GT   75.
C
8 ? 4 x 3.7 + 9 =16.4  8 [?] 4 [x] 3.7 [+] 9 [=]  GT   16.4
4
5  = 625   5 [x] [=] [=] [=]   GT   625.
1 / 2 = 0.5   2 [?] [=]   GT   0.5
1
(2  x     3 +  10)   = 0.0625 2 [x] 3 [+] 10 [?] [=]   GT   0.0625
A 0 2 3 F
$14.90+$0.35–$1.45+ 1490 [+] 35 [–] 145      145.
5/4  $12.05=$25.85   [+] 1205 [=]   GT   25.85
2. Memory Calculation
A 0 2 3 F  (12 x 4) – (20 ? 2)     [MRC] [  ON  ]      0.
C
= 38      12 [x] 4 [M+] 20 [?] 2 [M–]   M   10.
5/4
[MRC]         M   38.
[MRC] [  ON  ]      0.
C
3. Constant Calculation
A 0 2 3 F  2 + 3 = 5   2 [+] 3 [=]   GT   5.
4 + 3 = 7   4 [=]       GT   7.
3 x 4 = 12   3 [x] 4 [=]   GT   12.
3 x 6 = 18   6 [=]      GT   18.
4. Overflow Error Clear
123456789012 x 10000   123456789012   123’456’789’012.
12
= 1'234.56789012 x 10    [x] 100000 [00t0]  10000.
[=]       E  1’234.56789012
[  ON C  ]        0.
5. PRICE MARK-UP & DOWN CALCULATION
A 0 2 3 F  2000+(P x 20%)=P   2000 [?] 20 [MU]   2'500.00
2000    [MU]          500.00
5/4  P=    -   1  20%  =2'500.00
2500–2000 = 500.00
2000–(P x 20%)=P   2000 [?] 20 [+/–] [MU]   1'666.66
P=  2000  =1'666.66
1+   20%
18000    -    15000  x100%   18000 [–] 15000 [MU]   20.00
15000
= 20.00%
6. GT-MEMORY
Pressing [GT] twice before you operate GT function.
A 0 2 3 F  20 + 10 = 30   [GT] [GT] 20 [+] 10 [=]   GT   30.
45 – 25 = 20   45 [–] 25 [=]   GT   20.
50 x 3 = 150   50 [x] 3 [=]   GT   150.
total = 200   [GT]    GT   200.
200 x 15% = 30   [x] 15 [%]   GT   30.
200 + (200 x 15%)   [GT]   GT   230.
=230      [GT]            230.
[  ON C  ]      0.
All calculation results are automatically accumulated in GT
7. Tax Calculation
A 0 2 3 F  100+TAX(3%)=103   3 [RATE] [+TAX]     3.   %
Tax sum=3   100 [+TAX]     103.   +TAX
5/4          [+TAX]       3.   TAX
3=Tax sum     103=Tax inclusive value
206 – TAX(3%)   [  ON ] [RATE]
C
=200     [–TAX]       3.   %
Tax sum   100 [–TAX]   200.   –TAX
=6       [–TAX]       6.   TAX
6=Tax sum     200=Tax exclusive value
File name: D492_IB_English_041118.doc      Date : 2004/11/19
SIZE : 280x72mm (??:140x72mm)

*  ALIMENTACION           Espanol
Modelo CITIZEN SDC-620II funciona gracias a un mecanismo de doble
carga  (luz  solar y bateria de apoyo), lo cual le permite operar  bajo
cualquier condicion de iluminacion.
-Funcion de desconexion automatica-
La calculadora se apaga automaticamente si no ha sido utilizada
durante 9 minutos aproximadamente.
-Reemplazado de la pila-
Si la pila de apoyo necista ser reemplazada, quite los tornillos del
departamento inferior y sustituya la pila gastada por una nueva.
Coloque la pila en su posicion correcta, con la polaridad indicada.
Despues de cambiar la bateria pulse la almohadilla RESET en la
tarjeta de circuito impreso con un objeto metalico eliptico.
*  TECLADO INFORMATIVO    Espanol
ON
[ C ] : Tecla de encendido / Tecla de borrar entrada.
[00t0] : Tecla de anular el digito ultimado   [CE] : Borrar
[M+] : Tecla de memoria positiva   [+/–] : ±Tecla de cambio de signo
[M–] : Tecla de memoria negativa   [GT] : Tecla de importe total
[MRC] : Tecla de borrar de memoria / Tecla de limpieza de memoria
[MU] : Tecla de subir o bajar precios
[RATE] : Teclado de Puesta de Proporcion de lmpuesto
STORE
TAX ] : ?Precio con la tecla de tasa ?Para almacenar el indice de la
[ +
tasa cuando se presionan las teclas [RATE] y [+TAX].
RECALL
[ - TAX ] : ?Precio sin la tecla de tasa ?Para recobrar el indice de la
tasa cuando se presionan las teclas [RATE] y [–TAX] .
A 0 2 3 F  Selector del lugar decimal
– F –   Modo decimal flotante
– 0 – 2 – 3 – Modo decimal flotante
– A –   Modo ADD: ingresa automaticamente el decimal
monetario en calculos de suma y resta
5/4   Redondeo hacia arriba / Sin redondeo / Redondeo
hacia abajo
Los signos del visor significan lo siguiente:
M : Memoria     TAX : Cantidad de tasa
– : Menos (o negativo)   –TAX : Precio excluyendo la tasa
E : Error de desbordamiento   +TAX : Precio incluyendo la tasa
GT : Importe total   RATE : Ajuste del indice de la tasa
% : Indice de la tasa almacenada
*  EJEMPLO DE FUNCIONES   Espanol
1.Ejemplos de calculacion
Presione la tecla [  ON C  ] antes de cada calculo.
Ejemplo   Operacion con la tecla   Visualizacion
A 0 2 3 F  2 x 3 = 6   2 [x] 2 [CE] 3 [=]   GT   6.
7 x 9 = 63   7 [?] [x] 9 [=]     GT   63.
300 x 27% = 81   300 [x] 27 [%]   GT   81.
11.2   x 100% = 20%        20.
56       11.2 [?] 56 [%]   GT
300+(300x40%)=420  300 [+] 40 [%]   GT   420.
300–(300x40%)=180  300 [–] 40 [%]   GT   180.
1400 x 12% = 168   1400 [x] 12 [%]   GT   168.
6 + 4 + 7.5 = 17.5   6 [+] 4 [+] 7.5 [=]   GT   17.5
5 x 3 ? 0.2 = 75   [ ON C  ] 5 [x] 3 [?] 0.2 [=]  GT   75.
8 ? 4 x 3.7 + 9 =16.4  8 [?] 4 [x] 3.7 [+] 9 [=]  GT   16.4
4
5  = 625   5 [x] [=] [=] [=]   GT   625.
1 / 2 = 0.5   2 [?] [=]   GT   0.5
1
(2  x     3 +  10)   = 0.0625 2 [x] 3 [+] 10 [?] [=]   GT   0.0625
A 0 2 3 F
$14.90+$0.35–$1.45+ 1490 [+] 35 [–] 145      145.
5/4  $12.05=$25.85   [+] 1205 [=]   GT   25.85
2. Calculo de memoria
A 0 2 3 F  (12 x 4) – (20 ? 2)     [MRC] [  ON ]      0.
C
= 38      12 [x] 4 [M+] 20 [?] 2 [M–]   M   10.
5/4
[MRC]         M   38.
[MRC] [  ON  ]      0.
C
3. Constante
A 0 2 3 F  2 + 3 = 5   2 [+] 3 [=]   GT   5.
4 + 3 = 7   4 [=]       GT   7.
3 x 4 = 12   3 [x] 4 [=]   GT   12.
3 x 6 = 18   6 [=]      GT   18.
4. Limpieza de error de desbordamiento
123456789012 x 10000   123456789012   123’456’789’012.
12
= 1'234.56789012 x 10    [x] 100000 [00t0]  10000.
[=]       E  1’234.56789012
[  ON C  ]        0.
5. CALCULO DE SUBIR O BAJAR PRECIOS
A 0 2 3 F  2000+(P x 20%)=P   2000 [?] 20 [MU]   2'500.00
2000    [MU]          500.00
5/4  P=    -   1  20%  =2'500.00
2500–2000 = 500.00
2000–(P x 20%)=P   2000 [?] 20 [+/–] [MU]   1'666.66
P=  2000  =1'666.66
1+   20%
-
18000  15000  x100%   18000 [–] 15000 [MU]   20.00
15000
= 20.00%
6. MEMORIA GT
Presionar [GT] dos veces antes de que usted operere con la funcion GT.
A 0 2 3 F  20 + 10 = 30   [GT] [GT] 20 [+] 10 [=]   GT   30.
45 – 25 = 20   45 [–] 25 [=]   GT   20.
50 x 3 = 150   50 [x] 3 [=]   GT   150.
total = 200   [GT]    GT   200.
200 x 15% = 30   [x] 15 [%]   GT   30.
200 + (200 x 15%)   [GT]   GT   230.
=230      [GT]            230.
[  ON C  ]      0.
Todos los resultados del calculo son acumulados automaticamente en el GT
7. Calculo de impuestos
A 0 2 3 F  100+TAX(3%)=103   3 [RATE] [+TAX]     3.   %
Suma de impuesto =3  100 [+TAX]     103.   +TAX
5/4          [+TAX]       3.   TAX
3= Suma de impuesto    103= Valor con impuesto
206 – TAX(3%)   [  ON ] [RATE]
C
=200     [–TAX]       3.   %
Suma de impuesto =6 100 [–TAX]   200.   –TAX
[–TAX]       6.   TAX
6= Suma de impuesto    200= Valor sin impuesto
File name: D492_IB_Spanish_041118.doc      Date : 2004/11/19
SIZE : 280x72mm (??:140x72mm)