Источник бесперебойного питания TRIPP LITE SMX3000XLRT2UA. Инструкция на русском языке

Warranty             Owner’s Manual
chance to win a FREE Tripp Lite
Registration
Register online today for a
product! www.tripplite.com/warranty
SmartPro  2U Rackmount
®
Intelligent, Line-Interactive UPS Systems
230V Sine Wave Output • 1000VA—3000VA Capacities
Extended Runtime Options
SMX1000RT2U             SMX2200XLRT2U
(Series Number: AG-0072)  (Series Number: AG-0070)
SMX1500XLRT2U            SMX3000XLRT2UA
(Series Number: AG-0071)  (Series Number: AG-0069)
Not suitable for mobile applications.
Important Safety Instructions          2
Mounting                               4
Quick Installation                     6
Optional Installation                  7
Basic Operation                        9
Storage and Service                  17
Battery Replacement                  18
Warranty Registration                24
Espanol                              25
Francais                             49
Русский                              73
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All rights reserved. SmartPro  is a registered trademark of Tripp Lite.
®
1
13-09-242-93-3184.indb   1                                      12/9/2013   10:13:37 AM

Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
•   Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS
systems, at least two people should assist in lifting and installing them.
•   Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.
•   For best performance, the ambient temperature near the UPS should be between 0° C and 40° C
(between 32° F and 104° F).
•   Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents
or fan openings.
•   When mounting the UPS system in a tower orientation, make sure the LCD Screen panel is at the
top of the UPS, not at the bottom.
•   Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner
will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered
under warranty.
UPS Connection Warnings
•   The UPS contains its own energy source (battery). The output terminals may be live even when
the UPS is not connected to an AC supply.
•   Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way
that would eliminate the UPS’s connection to ground. Do not use adapters that eliminate the
UPS’s connection to ground.
•  The power outlet that supplies the UPS should be installed near the UPS and be easily
accessible.
•   Do not plug the UPS into itself; this will damage the UPS and void your warranty.
•   If you are connecting the UPS to a motor-powered AC generator, the generator must provide
filtered, frequency-regulated computer-grade output. Connecting the UPS to a generator will void
its Ultimate Lifetime Insurance.
Equipment Connection Warnings
•   Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
•   Do not connect surge suppressors or extension cords to the output of the UPS. This might
damage the UPS and may affect the surge suppressor and UPS warranties.
2
13-09-242-93-3184.indb   2                                      12/9/2013   10:13:37 AM

Important Safety Instructions
Battery Warnings
•   Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe
proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.
Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before
performing battery replacement. Use tools with insulated handles. There are no user-serviceable
parts inside the UPS. Battery replacement should be performed only by authorized service
personnel using the same number and type of batteries (Sealed Lead-Acid). The batteries
are recyclable. Refer to your local codes for disposal requirements or visit www.tripplite.com/
UPSbatteryrecycling for recycling information. Tripp Lite offers a complete line of UPS System
Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/support/
battery/index.cfm to locate the specific replacement battery for your UPS. The RBC Type can
also be found on the label affixed to the Battery Retention Plate.
•   During hot-swap battery replacement, the UPS will not provide backup power in the event of a
blackout or other power interruptions.
•   Do not operate the UPS without batteries.
External Battery Connection Warnings
•   When adding external battery packs to select models with external battery pack connectors,
connect only Tripp Lite-recommended battery packs of the correct voltage and type. Do not
connect or disconnect battery packs when the UPS is operating on battery power.
Visit www.tripplite.com/support/battery/index.cfm to locate the supported battery type(s) for
your UPS.
3
13-09-242-93-3184.indb   3                                      12/9/2013   10:13:37 AM