Блок распределения питания (PDUs) TRIPP LITE PDUMNV20HV. Инструкция на русском языке

Warranty           Owner’s Manual
chance to win a FREE Tripp Lite
Registration
Register online today for a
product! www.tripplite.com/warranty
Monitored Rack PDU
Switched Rack PDU
Zero U (Vertical) Format
AGPD7897 (208/230V 16 Amp Models) • AGPD7898 (208V 24 Amp Models)
AG00CA (200-240V 32A models)
Important Safety Instructions                           2
Monitored Rack PDU Features                             2
Switched Rack PDU Features                              3
Installation                                            3
Features                                                8
Configuration and Operation                           10
Warranty and Warranty Registration                    11
Espanol                                               13
Francais                                              25
Русский                                               37
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All rights reserved.
1
13-11-194-933093.indb   1                                       12/5/2013   5:21:52 PM

Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
•  The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise
protection for connected equipment.
•  The PDU is designed for indoor use only in a controlled environment isolated from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
•  Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
•  The power requirement for each item of equipment connected to the PDU must not exceed
the individual outlet’s load rating.
•  The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
•  Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
•  Do not attempt to modify the PDU, including its input plugs and power cables.
•  Do not attempt to use the PDU if any part of it is damaged.
•  Do not attempt to mount the PDU to an insecure or unstable surface.
•  Never attempt to install electrical equipment during a thunderstorm.
•  Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
•  Install in accordance with National Electrical Codes. Be sure to use the proper over current
protection for the installation, in accordance with the plug rating.
•  The electrical sockets supplying power to the equipment shall be installed near the
equipment and be easily accessible.
Monitored Rack PDU Features
•  Network interface enables remote power monitoring and event notification
•  Digital amp meter for on-site load monitoring
•  Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s
free PowerAlert Network Management System
•  Optional ENVIROSENSE accessory allows monitoring of network ambient temperature,
humidity and up to three dry contacts
•  Toolless button-mount installation in Tripp Lite SmartRack™ and many third-party enclosures
2
13-11-194-933093.indb   2                                       12/5/2013   5:21:53 PM

Switched Rack PDU Features
•  Network interface enables remote power monitoring and individual outlet control
•  Individually controllable outlets allow remote rebooting of locked-up network devices
•  Digital amp meter for on-site load monitoring
•  Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s
free PowerAlert Network Management System
•  Optional ENVIROSENSE accessory allows monitoring of network ambient temperature,
humidity and up to three dry contacts
•  Toolless button-mount installation in Tripp Lite SmartRack and many third-party enclosures
Installation
Mounting the PDU
Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are
designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact
mounting configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the
PDU are included. Use only the screws supplied by the manufacturer, or their exact equivalent (#6-32, ?"
flat head).
If installing the PDU in a rack that has button-mount slots, you only need to perform step  1-1 .
If your rack enclosure does not have button-mount slots, proceed to step  1-2 .
1-1  To install the PDU in a rack equipped
with button-mount slots, insert the
mounting buttons on the rear of the
PDU into the button-mount slots on
the rack and slide the PDU down until
the mounting buttons engage the
narrow section of the  of the button-
mount slots.
Note: To install the PDU with its outlets
facing the rear of the rack, use the
included PDUMVROTATEBRKT accessory.
This V-shaped bracket provides a mounting   1-1
button on one leg of the V and a button-
mount slot on the other, effectively
repositioning the mounting buttons. See
Features section for image.
1-2  Attach the mounting brackets to the
PDU.
1-3  (Optional) Attach the cord retention
bracket(s) to the PDU.
1-4  Attach the PDU to a vertical rail in
your rack or rack enclosure. (Use the
mounting hardware that came with
your rack or rack enclosure to attach
the mounting brackets to the rail.)
1-2         1-3         1-4
3
13-11-194-933093.indb   3                                       12/5/2013   5:21:54 PM