Блок распределения питания (PDUs) TRIPP LITE PDUMNH20HV. Инструкция на русском языке

Warranty             Owner’s Manual
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
High Voltage
Monitored Rack PDUs
Models: PDUMNH20HV, PDUMNH30HV & PDUMNH32HV
1.    Important Safety Instructions       2
2.    Features                            3
3.    Installation                        6
3.1   Mounting the PDU                    6
3.2   Connecting the PDU                  9
3.3   Networking the PDU                 11
3.4   Testing Network Connection         11
4.    Configuration and Operation        11
4.1   Remote Monitoring                  11
5.    Technical Support                  11
6.    Warranty & Warranty Registration   12
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2011 Tripp Lite. All rights reserved.
1
201110150-93-3050.indb   1                                      11/9/2011   11:13:06 AM

1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be
followed during the installation, operation, and storage of this
product. Failure to heed these instructions may affect your
warranty.
•  The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line
noise protection for connected equipment.
•  The PDU is designed for indoor use only in a controlled environment away from
excess moisture, temperature extremes, conductive contaminants, dust or direct
sunlight.
•  For optimum performance, temperatures should be kept between 32?F and 104?F
(0?C and 40?C)
•  Do not connect the PDU to an ungrounded outlet or to extension cords or adapters
that eliminate the connection to ground.
•  The outlet that supplies the PDU with mains AC power should be near the PDU and
easily accessible.
•  The power requirement for each piece of equipment connected to the PDU must not
exceed the individual outlet’s load rating.
•  The total power requirement for equipment connected to the PDU must not exceed
the maximum load rating for the PDU.
•  PDUs that do not contain output breakers need to be provided with suitable over-
current protection in accordance with your national and local electrical codes.
•  Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
•  Do not attempt to modify the PDU, including the input plugs and power cables.
•  Do not attempt to use the PDU if any part of it becomes damaged.
•  Do not attempt to mount the PDU to an insecure or unstable surface.
•  Never attempt to install electrical equipment during a thunderstorm.
•  Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture with air, oxygen or
nitrous oxide.
2
201110150-93-3050.indb   2                                      11/9/2011   11:13:06 AM

2. Features
IEC 309P AC Input Power Cord(PDUMNH32HV): The cord
is permanently attached to the PDU and has a 2P + E IEC
309P plug.
L6-30P AC Input Power Cord (PDUMNH30HV): The cord is
permanently attached to the PDU and has a NEMA L6-30P
plug.
AC Input Power Cord (PDUMNH20HV): The detachable
cord has an IEC-320-C19 connector  A  and an IEC-320-C20
connector  B .
A        B
IEC-320-C20 Power Inlet (PDUMNH20HV): The IEC power
inlet connects to the included power cord or a compatible
user-supplied power cord.
AC Input Adapter (PDUMNH20HV): The adapter converts
the AC input power cord to a NEMA L6-20P plug. The
included retention bracket (not shown) secures the
connection.
IEC-320-C13 Output Receptacles: These receptacles
distribute 208/230V AC power to connected equipment.
IEC-320-C19 Output Receptacles (PDUMNH30HV &
PDUMNH32HV): These receptacles distribute 208/230V AC
power to connected equipment.
Digital Load Meter (Ammeter) (PDUMNH20HV): The digital
load meter displays the load in amps.
LOAD (AMPS)
3
201110150-93-3050.indb   3                                      11/9/2011   11:13:07 AM