Блок распределения питания (PDUs) TRIPP LITE PDU3XVSR6G63A. Инструкция на русском языке

Warranty
register online today for a
Registration:
chance to win a FREE Tripp Lite    Owner’s Manual
product—www.tripplite.com/warranty
3-Phase Switched 0U Power
Distribution Units
208V MODELS
PDU3VSR6H50A • PDU3VSR6G60A
(Series Number: AG-0065) • (Series Number: AG-0063)
400V MODELS
PDU3XVSRHWA • PDU3XVSRHWB   PDU3XVSR6G32A • PDU3XVSR6G32B
(Series Number: AG-0057)                        (Series Number: AG-0080)
PDU3XVSR6L2230 • PDU3XVSR6L2230B  PDU3XVSR6G60A • PDU3XVSR6G60B
(Series Number: AG-0056)       (Series Number: AG-0093)
PDU3XVSR6G30A • PDU3XVSR6G30B  PDU3XVSR6G63A • PDU3XVSR6G63B
(Series Number: AG-0096)       (Series Number: AG-0094)
Important Safety Instructions            2
Installation                             3
Digital Display                          8
Using the Digital Display               10
Features                                16
Configuration and Operation             18
Service                                 18
Warranty and Warranty Registration      19
Espanol                                 20
Francais                                39
Русский                                 58
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All rights reserved.
1
13-09-017-9332B8.indb   1                                        9/5/2013   4:26:45 PM

Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during
the installation, operation, and storage of this product. Failure to heed these
instructions and warnings may affect the product warranty.
•  The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise
protection for connected equipment.
•  The PDU is designed for indoor use only in a controlled environment away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
•  Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
•  The power requirement for each piece of equipment connected to the PDU must not exceed
the individual outlet’s load rating.
•  The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
•  Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
•  Do not attempt to modify the PDU, including the input plugs and power cables.
•  Do not attempt to use the PDU if any part of it becomes damaged.
•  Do not attempt to mount the PDU to an insecure or unstable surface.
•  Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
•  Never attempt to install electrical equipment during a thunderstorm.
•  Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C).
•  Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
•  Do not attempt to open the PDU; there are no user-serviceable parts inside.
•  The PDU must be installed by a qualified technician only.
2
13-09-017-9332B8.indb   2                                        9/5/2013   4:26:45 PM

Installation
Mounting the PDU
Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are designed
for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary. Screws for attaching the mounting brackets to the PDU are included. Use only the screws
supplied by the manufacturer or their exact equivalent.
Note: Mounting buttons come preinstalled to the PDU for toolless mounting.
1-1    To attach the mounting brackets to the
PDU, remove the mounting buttons.
1-2    Attach the mounting brackets to the
PDU with the included screws.
1-1            1-2
1-3    Attach the PDU to a vertical rail in
your rack or rack enclosure. (Use the
mounting hardware that came with your
rack or rack enclosure to attach the
mounting brackets to the rail.)
1-3
1-4    To reinstall the mounting buttons for
toolless mounting, remove the mounting
brackets then install the mounting
buttons onto the PDU. Position the PDU
as desired in the rack enclosure, align
the buttons with the rack mounting   1-4
slots, and slide the PDU into position.
Note: Be sure to insert the 2 buttons into either
the upper hole at each end of the PDU or into
the lower hole at each end of the PDU.
1-5    To install the PDU with its outlets facing   B
the rear of the rack, use the included      A
PDUMVROTATEBRKT accessory. First,
attach the mounting button  A  to the
V-shaped bracket  B  using the included
screw and washer. Then, use the
button-mount slot to attach the bracket
to the PDU and the mounting button to
attach the PDU to the rack. The bracket
effectively repositions the mounting
brackets allowing for the PDU outlets to
face the rear of the rack.
1-5
3
13-09-017-9332B8.indb   3                                        9/5/2013   4:26:46 PM