Источник бесперебойного питания TRIPP LITE OMNIVSINT1000. Инструкция на русском языке

Owner’s Manual
Models: OMNIVSINT800,
OMNIVSINT1000, OMNIVSINT1500XL*
230V Input, Line-Interactive UPS Systems (Tower Configuration)
* Extended runtime options
Not suitable for mobile applications.
Important Safety Instructions                                 2
Quick Installation                                            3
Basic Operation                                               5
Storage & Service                                             8
Espanol                                                        9
Francais                                                      17
???????                                                       25
1111 W. 35th Street  Chicago, IL 60609 USA
www.tripplite.com/support
Copyright  ©  2009 Tripp Lite. All rights reserved.
1
200908153  93-2205.indd   1                                   11/2/2009   1:17:15 PM

Important Safety Instructions
SAVE THESE INSTRUCTIONS
This  manual  contains  instructions  and  warnings  that  should  be  followed  during  the
installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these
warnings will void your warranty.
UPS Location Warnings
•  Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
•  For best performance, keep the indoor temperature between between 32? F and 104? F
(0? C and 40? C).
•  Leave adequate space around all sides of the UPS for proper ventilation.
UPS Connection Warnings
•  Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS
into itself; this will damage the UPS.
•  Do not modify the UPS’s plug, and do not use an adapter that would eliminate the UPS’s
ground connection.
•  Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be
voided if anything other than Tripp Lite surge suppressors are used to connect your UPS
to an outlet.
•  If the UPS receives power from a motor-powered AC generator, the generator must
provide clean, filtered, computer-grade output.
Equipment Connection Warnings
•  Use of this equipment in life support applications where failure of this equipment can rea-
sonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
•  Do not connect surge suppressors or extension cords to the output of your UPS.
Battery Warnings
•  Batteries can present a risk of electrical shock and burn from high short-circuit current.
Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS
or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn
off the UPS before performing battery replacement. Use tools with insulated handles.
There are no user-serviceable parts inside the UPS. Battery replacement should be per-
formed only by authorized service personnel using the same number and type of batteries
(Sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal
requirements. Tripp Lite offers a complete line of UPS System Replacement Battery
Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/support/battery/
index.cfm to locate the specific replacement battery for your UPS.
2
200908153  93-2205.indd   2                                   11/2/2009   1:17:15 PM

Quick Installation
1  Unplug the computer’s power
cord from both AC outlet and
the computer’s AC input.
1
IEC320-C14 plug shown
2  Insert the female plug of the
NORM       DELAY
computer’s cord into the
UPS’s AC input.   Insert the
A
male plug of the computer's                A
cord into AC outlet.
NOTE! After you plug the UPS into a live AC outlet, the UPS will
turn ON automatically. See “ON/OFF” Button description in the   2
Basic Operation section if you want to place the UPS in any mode
other than ON.                                 Shown: OMNIVSINT1000
3  Using one of the jumper cords
supplied with the UPS, insert                          NORM       DELAY
the cord’s female plug into
computer’s AC input  B . Insert
the  cord’s  male  plug  into any of
UPS’s female output receptacles.                              B
3
Shown: OMNIVSINT1000
NORM       DELAY
4  Plug additional equipment into
the UPS.*
Use one of the additional jumper cords supplied with
the  UPS,  or  order  additional  jumper  cords  from
Tripp Lite. Log on to www.tripplite.com/support; order
part # P004-006.
* Your UPS is designed to support only computer equipment. You
will overload the UPS if the total VA ratings for all the equipment you   4
connect exceeds the UPS’s output capacity (see Specifications). To   Shown: OMNIVSINT1000
find your equipment's VA ratings, look on their nameplates. If the
equipment is listed in amps, multiply the number of amps by 230 to
determine VA. (Example: 1 amp ? 230 = 230 VA). If you are unsure if
you  have  overloaded  the  UPS’s  outlets,  see  “OUTPUT  LOAD
LEVEL” LED description.
3
200908153  93-2205.indd   3                                   11/2/2009   1:17:16 PM