КВМ-переключатель TRIPP LITE B022-U08-IP. Инструкция на русском языке

Owner’s Manual
NetDirector™ 1U Rackmount
KVM Switches with IP Access
Models: B022-U08-IP, B022-U16-IP
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
1

Table of Contents
1. FCC Information                               3      6.5 Logging Into the KVM over IP                 16
2. User Notice                                   3       6.5.1 Logging In via Web Browser                16
6.5.2 Logging In via the AP Windows Client      17
3. Package Contents                              3
6.5.3 Logging In via the AP Java Client         18
4. Introduction                                  3
6.6 Web Browser and Non-Browser Remote Port Access   18
4.1 Features                                     3
6.6.1 Port Access via Remote OSD                19
4.2 System Requirements                          4
6.6.2 Port Access via Remote OSD Toolbar        19
4.2.1 External Console                          4
6.6.3 Mouse Synchronization                     20
4.2.2 Computers                                 4
6.6.4 Remote Auto Scan                          21
4.2.3 Remote Console                            4
6.6.5 Panel Array Mode                          21
4.2.4 Supported Browsers                        4
6.6.6 Remote Control Panel                      22
4.2.5 Custom KVM Cable Kits                     4
7. Administration                               25
4.2.6 Operating Systems                         4
7.1 Local Console OSD                            26
4.3 Components                                   5
7.1.1 Local Console OSD F2 LIST Function        26
4.3.1 Front View                                5
7.1.2 Local Console OSD F3 Settings (SET) Page   26
4.3.2 Rear View                                 5
7.1.3 Local Console OSD F4 Administration (ADM) Page   28
5. Installation                                  6
7.1.4 Local Console Firmware Upgrade            29
5.1 General Safety Instructions                  6
7.2 Remote OSD                                   30
5.2 Rack Mounting Instructions                   7
7.2.1 Remote OSD List Drop-Down                 30
5.3 Grounding                                    7
7.2.2 Remote OSD Configuration Tab              31
5.4 Installation                                 7
7.2.3 Remote OSD Administration Tab             31
5.5 Network Setup-IP Address Configuration       8
7.3 Web Management Interface                     42
5.5.1 Local Console                             8
7.3.1 General Information                       42
5.5.2 IP Installer                              8
7.3.2 Network                                   43
5.5.3 Browser                                   9
7.3.3 Security                                  44
5.5.4 Non-Browser Clients                       10
7.3.4 ANMS                                      45
6. KVM Operation                                 12      7.3.5 User Management                           51
6.1 Sharing USB Peripheral Devices               12
7.3.6 Customization                             51
6.2 Powering Off and Restarting                  12
7.3.7 Maintenance                               53
6.3 Local Console Login                          12      7.3.8 Log                                       53
6.4 Local Console Port Access                    13
7.4 Log Server                                   54
6.4.1 Local Console OSD Invocation Sequence     13
8. Specifications                               57
6.4.2 Local Console OSD Navigation              13
8.1 OSD Default Settings                         58
6.4.3 Local Console OSD Main Screen Headings    13
8.2 Keyboard Emulation                           58
6.4.4 Local Console OSD F1 GOTO Function        13
9. Warranty & Product Registration              59
6.4.5 Local Console OSD F5 Skip Function        13
6.4.6 Local Console OSD F6 Broadcast Mode (BRC)   14
6.4.7 Local Console OSD F7 Auto Scan Function   14
6.4.8 Local Console OSD F8 Logout Function      14
6.4.9 Local Console Pushbuttons                 14
6.4.10 Local Console Hotkey Commands            14
2

1. FCC Information
This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
2. User Notice
All information, documentation and specifications contained in this manual are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed
“as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor or its dealer), assumes the
entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected
prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.
3. Package Contents
This package consists of:
•  B022-U08-IP or B022-U16-IP KVM Switch                •  External Power Supply
•  6 ft. USB/PS2 Combo KVM Cable Kits (x2)              •  Rubber Feet
•  USB/PS2 Combo Console Cable Kit                      •  CD with Owner’s Manual, Quick Start Guide and Device Files
•  RJ11 to DB9 Firmware Upgrade Cable                   •  Quick Start Guide
•  Rackmount Hardware
Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other
devices in the installation.
4. Introduction
4.1 Features
•  1U Rackmount KVM Switch with built-in IP access.
•  Connect either USB or PS/2 computers using P778-Series USB/PS2 Combo KVM Cable Kits – no need for separate cable kits.
•  Control up to 8 (B022-U08-IP) or 16 (B022-U16-IP) computers on a single KVM switch.
•  Remotely access computers via LAN, WAN or Internet via the Windows™ or Java browser clients.
•  AP Windows and Java clients allow the KVM to be remotely accessed via the network without going through a browser.
•  External USB 1.1 port allows USB peripheral devices to be shared amongst connected computers.
•  Grayscale feature allows you to view remote sessions in black and white, reducing the amount of data traveling over the network and improving
keyboard/mouse response time over IP.
•  Web management interface, OSD and toolbars provide convenient, user-friendly operation.
•  3-level security (Admin, User and Select) – up to 64 accounts can be created.
•  Panel Array Mode – remotely monitor multiple ports at the same time.
•  Message board feature allows users who are logged in at the same time to communicate with each other and manage port access.
•  CD includes a Windows-based log server that records events on the installation and writes them to a searchable database.
•  Supports RADIUS and LDAP/S authentication.
•  Flash firmware upgradable via network and included firmware upgrade cable.
•  Supports both IPv4 and IPv6.
•  Supports Link Local IPv6 Address and IPv6 Stateless Auto configuration protocol.
•  Web Management Interface, Remote OSD and Local OSD can be displayed in English, Spanish, French, German and Japanese.
•  Advanced encryption technologies: 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES, 168-bit 3DES.
•  Video resolutions up to 2048 x 1536, DDC2B are supported at the local console. Video resolutions up to 1600 x 1200 @ 60Hz,
24-bit color depth are supported at the remote console.
3