Инвертор/преобразователь TRIPP LITE APSX1250. Инструкция на русском языке

WArrAntY
register on-line today for
a chance to win a FrEE tripp Lite
rEgIstrAtIOn                 Owner’s Manual
product! www.tripplite.com/warranty
PowerVerter
®
DC-to-AC Inverter/Chargers
1111 W. 35th Street, Chicago, IL 60609 USA
APsX Models  Input       Output          APs Models   Input        Output                   Customer Support: 773.869.1234
Invert:    12 VDC        230V, 50 Hz. AC  Invert:    12 VDC        120V, 60 Hz. AC              www.tripplite.com
Charge:    230V, 50 Hz. AC  12  VDC      Charge:     120V, 60 Hz. AC   12 VDC
Quiet Mobile Power
Congratulations! You've purchased the most advanced, feature-rich Inverter/Charger designed as an alternative energy source for residential,
commercial or recreational vehicle applications. Tripp Lite Inverter/Chargers are the quiet alternative to gas generators—with no fumes, fuel or
noise to deal with! You get AC electricity anywhere and anytime you need it: utility power disruptions, rolling down the highway, dry camping
in majestic back country or parked overnight at a money-saving non-electric site. Inverter/Chargers provide your equipment with utility- or
generator-supplied AC electricity (filtered through premium ISOBAR® surge protection) whenever available. In addition, your Inverter/Charger
automatically recharges your connected battery bank. Whenever blackouts, brownouts or high voltages occur, your Inverter/Charger immedi-
ately and automatically switches to battery power.
Better for Your Equipment                                 Premium Protection Levels
•  Built-In ISOBAR  Surge Protection
®
•  Automatic Overload Protection
Ideal Output for All Loads
•  Frequency-Controlled Output
•  Automatic Load Switching
•  Balanced Load Sharing
Better for Your Batteries                                 Faster Battery Recharge
•  High-Amp, 3-Stage Battery Charger
Critical Battery Protection
•  High-Efficiency DC-to-AC Inversion
Better for You                                            Quiet, Simple, Maintenance-Free Operation
•  Multi-Function Lights & Switches
•  Moisture-Resistant Construction*
Contents
Safety                                          2          AC Input/Output Connection                       10
Feature Identification                          3          Service/Maintenance                              10
Operation                                       4-5        Troubleshooting                                  11
Configuration                                   5-6        Warranty                                         11
Battery Selection                               7           Espanol                                         12
Mounting                                        8           Francais                                        23
Battery Connection                              9           Pynneee                                         34
* Inverter/Chargers are moisture-resistant, not waterproof.
Copyright © 2008. All rights reserved. PowerVerter  is a registered trademark of Tripp Lite.
®

Important safety Instructions
sAVE tHEsE InstrUCtIOns!
This manual contains important instructions and warnings that should be followed during the installation, operation and storage of this product.
Location Warnings
•  Although your Inverter/Charger is moisture resistant, it is NOT waterproof. Flooding the unit with water will cause it to short circuit
and could cause personal injury due to electric shock. Never immerse the unit, and avoid any area where standing water might
accumulate. Mounting should be in the driest location available.
•  Leave a minimum of 2" clearance at front and back of the Inverter/Charger for proper ventilation. To avoid automatic Inverter/Charger
shutdown due to overtemperature, any compartment that contains the Inverter/Charger must be properly ventilated with adequate
outside air flow. The heavier the load of connected equipment, the more heat will be generated by the unit.
•  Do not install the Inverter/Charger directly near magnetic storage media, as this may result in data corruption.
•  Do not install near flammable materials, fuel or chemicals.
•  Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the
unit's internal cooling, eventually causing product damage not covered under warranty.
Battery Connection Warnings
•  The battery should be connected before operating the Inverter/Charger
•  Multiple battery systems must be comprised of batteries of identical voltage, age, amp-hour capacity and type.
•  Because explosive hydrogen gas can accumulate near batteries if they are not kept well ventilated, your batteries should not be
installed (whether for a mobile or stationary application) in a “dead air” compartment. Ideally, any compartment would have some
ventilation to outside air.
•  Sparks may result during final battery connection. Always observe proper polarity as batteries are connected.
•  Do not allow objects to contact the two DC input terminals. Do not short or bridge these terminals together. Serious personal injury
or property damage could result.
Equipment Connection Warnings
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the fail-
ure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equip-
ment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
•  You may experience uneven performance results if you connect a surge suppressor, line conditioner or UPS system to the output of
the Inverter/Charger.
•  Corded Models: Do not modify the Inverter/Charger’s plug or receptacle in a way that eliminates its ground connection. Do not use
power adapters that will eliminate the plug’s ground connection.
•  Connect your Inverter/Charger only to a properly grounded AC power outlet or hardwired source. Do not plug the unit into itself;
this will damage the device and void your warranty.
•  The main grounding lug should be connected to earth ground or to the vehicle chassis with a minimum 8 AWG wire.
Operation Warnings
•  Your Inverter/Charger does not require routine maintenance. Do not open the device for any reason. There are no user-serviceable parts inside.
•  Potentially lethal voltages exist within the Inverter/Charger as long as the battery supply and/or AC input are connected. During any
service work, the battery supply and AC input connection (if any) should therefore be disconnected.
•  Do not connect or disconnect batteries while the Inverter/Charger is operating in either inverting or charging mode. Operating Mode
Switch should be in the DC OFF position. Dangerous arcing may result.
Caution: These models have a failsafe AC pass-through feature where the AC output will be live (if AC input is
available) even though the operating mode switch is set to “DC OFF.”
2

Feature Identification
Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
1  Configuration  DIP  Switches:  optimize  Inverter/Charger   6  AC Output Receptacles
operation  depending  on  your  application.  See  Configuration    AC Input Receptacle (230V Models): attach input cord to con-
section for setting instructions.                      7A  nect the Inverter/Charger to any source of utility- or generator-
2  Operating Mode Switch: controls Inverter/Charger operation.   supplied  AC  power.  The  user  must  provide  an  appropriate
The "AUTO/REMOTE" setting ensures your equipment receives   country-specific input cable for 230V Models. See AC Input/
constant, uninterrupted AC power. It also enables the Inverter/  Output Connection section for instructions.
Charger  to  be  remotely  monitored  and  controlled  with  an   AC Input Cord (120V Models): plug the Inverter/Charger into
optional remote module (Tripp Lite model APSRM4, sold sepa-  7B  a utility- or generator-supplied AC power outlet.
rately). The "CHARGE ONLY" setting allows your batteries to
return to full charge faster by turning the inverter off which halts   8  Resettable Circuit Breakers: protect your Inverter/Charger against
battery discharging. The "DC OFF" setting de-energizes the unit   damage due to overload or charger failure. See Operation sec-
and connects AC OUT to AC IN. See Operation section for set-  tion for resetting instructions.
ting instructions.                                      9  Remote Control Module Connector: allows remote monitoring
3  "LINE",  "INVERT",  "LOAD"  LEDs:  show  whether  the    and control with an optional module (Tripp Lite model APSRM4,
Inverter/Charger is operating from AC line power or DC battery   sold separately). See remote module owner’s manual for con-
power. It also warns you if the connected equipment load is too   nection instructions.
high. See Operation section for instructions on reading the indi-  10  Main Ground Lug: properly grounds the Inverter/Charger to
cator lights.                                             vehicle grounding system or to earth ground. See Configuration
4  "BATT VOLTAGE" LEDs: these three lights will turn ON in   section for instructions.
several sequences to show approximate battery level. See Operation   11  Cooling Fan: quiet, efficient fan prolongs equipment service life.
section for instructions on reading the indicator lights.
5  DC Power Terminals: connect to your battery terminals. See
Battery Connection section for instructions.
1     4     9     3     2                                       1    4    9    3    2
8
8
11                                                        11
6
6
10
5                                                         5
7A
7B              10
Front View (230V Non-Corded Models)                       Front View (120V Corded Models)
3