Планшетный компьютер PRESTIGIO MultiPad 7.0 Prime PMP3270BRU. Инструкция на русском языке

Quick Start Guide
Prestigio MultiPad
PMP3270B             EN
1. Packing List
1. Prestigio MultiPad      2. AC Adapter
3. Legal and Safety Notices   4. USB Cable
5. Quick Start Guide       6. Warranty Card
7. OTG Cable
2. Device Overview
9    1
7
4
3
5
8
6
2
PMP3270B                                                                    EN - 1

Quick Start Guide
Prestigio MultiPad
PMP3270B
1   Power          Turn on/off the device;
EN
Suspend/Activate the device
2   Micro SD Card Slot   Insert Micro SD card.
3   USB port       USB connection.
4   Charging Indicator   Turn to red during charging and turn to
green as finishing charging
5   Earphone Jack   Earphones connection.
6   Built-in Microphone     Record sounds.
7   Camera         Take photos.
8   Reset          Reset the device if it fails to operate
correctly
9   Vol +\ Vol - Button   Adjust the volume level.
Getting Started
3. Charging
z  Insert the connector of adaptor to the DC port of the device and
connect the power adapter to the wall socket for charging.
z  Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
4. Power on/Power off
z  To turn on the device, press and hold the Power Button until you see
the start-up screen then release. It will automatically enter the Home
screen.If it is first time to use it, it will enter Prestigio Wizard
screen.please follow the on-screen instructions
z  Press the Power Button once to enter sleep mode and press it again
to awake the device.
z  Press and hold the Power Button, and then tap on OK to power off
the device.
EN – 2                                                   PMP3270B

Quick Start Guide
Prestigio MultiPad
PMP3270B
5.Inserting a Memory Card                     EN
z  The device supports micro SD/SDHC cards.
z  To insert a Micro SD card, place the card connector towards the front
side of the device and the printing side of the card towards the rear
side of the device.
z  To remove the micro SD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
Notice:
When you are reading the file from micro SD card, please don’t
remove it, or the device could fail to operate correctly.
6. Connecting to Wi-Fi
z  In the Home menu press the    icon and select Settings icon to
access the list of options. Select Wireless & networks.
z  If the Wi-Fi is off, tap on the Wi-Fi line to turn it on.
z  The device will scan for available Wi-Fi networks and display them at
the right of the screen.
z  Tap on the network you want to connect to. Then tap inside the
Wireless password field to make the virtual keyboard appear. Enter
the required network information, tap on Enter, and then tap on
Connect.
z  Your device will now attempt to establish a connection to the Wi-Fi
access point with the network parameters you entered.
7. Transferring content from PC
z  Connect the device to your PC/Notebook via USB cable.
z  Select the content you want to transfer from your PC/Notebook.
z  Drag the content from the PC/Notebook to the device.
z  Please do not disconnect the USB cable during loading. It may cause
malfunction of the device and files.
z  Left click on    to disconnect the device and PC/Notebook safely.
PMP3270B                                                                    EN - 3