Планшет PRESTIGIO MultiPad 7.0 ULTRA+ (PMT3677_Wi). Инструкция на русском языке

Quick Start Guide
Prestigio MultiPad
Packing list
• Prestigio MultiPad  • AC adapter          EN
• USB cable      • OTG cable
• Quick start guide  • Warranty card
• Legal and safety notices
Device overview
6
1
2
3
4
5
8   Micro SD
7

Quick Start Guide
Prestigio MultiPad
• Turn on/off the device; Suspend/Activate the
1  Power
device.
EN
2  Earphone Jack • Earphones connection.
3  USB port   • USB connection.
Vol +\ Vol -
4           • Adjust the volume level.
Button
5  Speaker  • Emit sound, voice or music.
6  Camera   • Take photos.
7  Reset    • Reset the device if it fails to operate correctly.
Micro SD Card
8           • Insert Micro SD card.
Slot
Getting started
1. Charging
• Insert micro USB cable into the device and connect the other end to your
PC for charging.
• Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging may extend the time of full charging.
2. Power on/Power off
• To turn on the device, press and hold the power button until you see the
start-up screen, and then release the button. It will automatically enter
the Home screen. If it is your first time to use it, it will enter Prestigio
Wizard screen, please follow the on-screen instructions to finish settings.
• Press the power button once to enter sleep mode and press it again to
awake the device.
• Press and hold the power button, and then tap OK to power off the
device.

Quick Start Guide
Prestigio MultiPad
3. Inserting a memory card
• The device supports micro SD/SDHC cards.
• Insert a micro SD card with the gold contacts facing upwards, and push it   EN
into the slot until it locks in place.
• To remove the micro SD card, push it until it disengages from the device,
and then pull it out.
Notice:
When you are reading the file from micro SD card, please do not remove it.
Otherwise, the device may not work smoothly.
4. Connecting to Wi-Fi
• On the Home screen, tap    icon and select Settings to access the list of
options. Select Wireless & networks.
• If the Wi-Fi is off, drag the bar to the right to turn it on.
• The device will scan for available Wi-Fi networks and list them at the right
of the screen.
• Tap the network you want to connect to. Enter the required network
information, tap Enter, and then tap Connect.
• Your device will attempt to connect to the Wi-Fi access point you
selected.
5. Transferring content from PC
• Connect the device to your PC/Notebook via the included USB cable.
• Select the content you want to transfer on your PC/Notebook.
• Drag the content from the PC/Notebook to the device.
• Please do not disconnect the USB cable during file transferring. It may
cause malfunction of the device and files.
• Left click on    to disconnect the device from the PC/Notebook safely.