Материнская плата GIGABYTE GA-8IE800. Инструкция на английском языке

When you installing AGP card, please make sure the follow
ing notice is fully understood and practiced. If your AGP
card has "AGP 4X notch"(show below), please make sure
your AGP card is AGP 4X (1.5V).
Caution: AGP 2X(3.3V) card is not supported by  Intel  845
®
(E/G)/ Intel  850(E) . You might experience system unable to
®
boot up normally. Please insert an AGP 4X(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible
with 2X/4X mode AGP slot. It can be switched between AGP 2X
(3.3V) or 4X(1.5V) mode by adjusting the jumper. The factory
default for this card is 2X(3.3V). The GA-8IE800 (or any AGP 4X
only) motherboards might not function properly, if you install this card
without switching the jumper to 4X(1.5) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305
cards, their golden finger is compatible with 2X/4X mode AGP
slot, but they support 2X(3.3V) only.The GA-8IE800 (or any AGP
4X only) motherboards might not function properly, If you install this
card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi  Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X (1.5V)  specification. Therefore, AG32S (G)will work
fine with Intel   845(E/G) / 850(E) based motherboards.
®

M The author assumes no responsibility for any errors or omissions
that may appear in this document nor does the author make a
commitment to update the information contained herein.
M Third-party brands and names are the property of theirrespective
owners.
M Please do not remove any labels on motherboard, thismay void the
warranty of this motherboard.
M Due to rapid change in technology, some of the specifications might
be out of date before publication of this booklet.

Declaration of Conformity
We,  Manufacturer/Importer
(full  address)
G.B.T. Technology Trading GMbH
Ausschlager Weg  41, 1F, 20537 Hamburg, Germany
declare that  the product
(  description of the apparatus, sy stem, installation to w hich it refers)
Mother Board
GA-8IE800
is in conformity with
(reference to the  specification under  which conformity  is declared)
in accordance with 89/336  EEC-EMC Directive
o EN 55011  Limits and methods  of measurement  o EN 61000-3-2*  Disturbances in supply systems cause
of radio disturbance characteristics of  T EN 60555-2  by household appliances and similar
industrial,scientific and medical (ISM  electrical equipment “Harmonics”
high frequency equipment
o EN 55013  Limits and methods  of measurement  o EN 61000-3-3*  Disturbances in supply systems cause
of radio disturbance characteristics of  T EN 60555-3  by household appliances and similar
broadcast receivers and associated  electrical equipment “Voltage fluctuations”
equipment
o EN 55014  Limits and methods  of measurement  T EN 50081-1  Generic emission standard Part 1:
of radio disturbance characteristics of  Residual commercial and light industry
household electrical appliances,
portable tools and similar electrical  T EN 50082-1  Generic immunity standard Part 1:
apparatus                       Residual commercial and light industry
o EN 55015  Limits and methods  of measurement  o EN 55081-2  Generic emission standard Part 2:
of radio disturbance characteristics of  Industrial environment
fluorescent lamps and luminaries
o EN 55020  Immunity from radio interference of  o EN 55082-2  Generic emission standard Part 2:
broadcast receivers and associated  Industrial environment
equipment
T EN 55022  Limits and methods  of measurement  o ENV 55104  lmmunity requirements for household
of radio disturbance characteristics of  appliances tools and similar apparatus
information technology equipment
o DIN VDE 0855  Cabled distribution systems; Equipment  o EN50091-2  EMC requirements for uninterruptible
o part 10  for receiving and/or distribution from  power systems (UPS)
o part 12  sound and television signals
T CE marking                      (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual requir ed safety standards in accordance with LVD 73/23 EEC
o EN 60065  Safety requirements for mains operated  o EN 60950  Safety for information technology equipment
electronic and related apparatus for  including electrical bussiness equipment
household and similar general use
o EN 60335  Safety of household and similar  o EN 50091-1  General and Safety requirments for
electrical appliances          uninterruptible power systems (UPS)
Manufacturer/Importer
Signature:  Timmy Huang
Date : Jan. 17, 2003  Name:  Timmy Huang