Материнская плата GIGABYTE GA-8I865PE-L. Инструкция на английском языке

When you installing AGP card, please make sure the following
notice is fully understood and practiced.  If your AGP card has
"AGP 4X/8X (1.5V) notch"(show below), please make sure your
AGP card is AGP 4X/8X (1.5V).
AGP 4X/8X notch
Caution: AGP 2X card is not supported by Intel  845(GE/PE) / 845(E/
®
G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)
mode by adjusting the jumper. The factory default for this card is
2X(3.3V). The GA-8I865PE-L (or any AGP 4X/8X only) motherboards might
not function properly, if you install this card without switching the jumper to
4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger
is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X
(3.3V) only. The GA-8I865PE-L (or any AGP 4X/8X only) motherboards
might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel  845(GE/PE) /
®
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.

M The author assumes no responsibility for any errors
or omissions that may appear in this document nor
does the author make a commitment to update the
information contained herein.
M Third-party brands and names are the property of
their respective owners.
M Please do not remove any labels on motherboard, this
may void the warranty of this motherboard.
M Due to rapid change in technology, some of the
specifications might be out of date before publication
of this booklet.

Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Trading GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-8I865PE
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
o EN 55011  Limits and methods of measurement  o EN 61000-3-2*  Disturbances in supply systems cause
of radio disturbance characteristics of  T EN 60555-2  by household appliances and similar
industrial,scientific and medical (ISM  electrical equipment “Harmonics”
high frequency equipment
o EN 55013  Limits and methods of measurement  o EN 61000-3-3*  Disturbances in supply systems cause
of radio disturbance characteristics of  T EN 60555-3  by household appliances and similar
broadcast receivers and associated  electrical equipment “Voltage fluctuations”
equipment
o EN 55014  Limits and methods of measurement  T EN 50081-1  Generic emission standard Part 1:
of radio disturbance characteristics of  Residual commercial and light industry
household electrical appliances,
portable tools and similar electrical  T EN 50082-1  Generic immunity standard Part 1:
apparatus                        Residual commercial and light industry
o EN 55015  Limits and methods of measurement  o EN 55081-2  Generic emission standard Part 2:
of radio disturbance characteristics of  Industrial environment
fluorescent lamps and luminaries
o EN 55020  Immunity from radio interference of  o EN 55082-2  Generic emission standard Part 2:
broadcast receivers and associated  Industrial environment
equipment
T EN 55022  Limits and methods of measurement  o ENV 55104  lmmunity requirements for household
of radio disturbance characteristics of  appliances tools and similar apparatus
information technology equipment
o DIN VDE 0855  Cabled distribution systems; Equipment  o EN50091-2  EMC requirements for uninterruptible
o part 10  for receiving and/or distribution from  power systems (UPS)
o part 12  sound and television signals
T CE marking                       (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
o EN 60065  Safety requirements for mains operated  o EN 60950  Safety for information technology equipment
electronic and related apparatus for  including electrical bussiness equipment
household and similar general use
o EN 60335  Safety of household and similar  o EN 50091-1  General and Safety requirements for
electrical appliances           uninterruptible power systems (UPS)
Manufacturer/Importer
Signature:  Timmy Huang
Date : November 28, 2003  Name:  Timmy Huang
(Stamp)