Монитор ЖК SAMSUNG 953BW. Инструкция на английском языке

SyncMaster 953BW
LCD Monitor
User Manual
imagine the possibilities

Safety Instructions
Notational
Note
Please read the following safety instructions as they are designed to prevent damage to property and
harm to the user.
Warning / Caution
Failure to follow directions noted by this symbol could result in bodily harm
or damage to the equipment.
Notational Conventions
Important  to  read  and  under-
Prohibited
stand at all times
Disconnect  the  plug  from  the
Do not disassemble
outlet
Ground  to  prevent  an  electric
Do not touch
shock
Power
When not used for extended period of time, set your computer to DPM.
If using screen saver, set it to active screen mode.
The images here are for reference only, and are not applicable in all cases (or
countries).
Shortcut to Anti-Afterimage Instructions
Do not use damaged or loose plug.
•  This may cause electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands.
•  This may cause electric shock or fire.
Use only a properly grounded plug and receptacle.
•  An improper ground may cause electric shock or equipment damage.
(Class 1 Equipment only.)
Insert the power plug firmly so that it does not come loose.
•  A bad connection may cause fire.
1

Safety Instructions
Do not excessively bend the plug and wire nor place heavy objects
upon them, which could cause damage.
•  This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
•  This may cause fire.
Do not disconnect the power cord while using the monitor.
•  A surge may be caused by the separation and may damage the mon-
itor.
Do not use the power cord when the connector or plug is dusty.
•  If the connector or plug of the power cord is dusty, clean it with a dry
cloth.
•  Using the power cord with a dusty plug or connector may cause an
electric shock or fire.
To disconnect the apparatus from the mains, the plug must be pulled
out from the mains socket, therefore the mains plug shall be readily op-
erable.
•  This may cause electric shock or fire.
Installation
Be sure to contact an authorized Service Center when installing your monitor in
a location with heavy dust, high or low temperatures, high humidity, and exposed
to chemical substances and where it operates for 24 hours such as at airports,
train stations etc.
Failure to do so may cause serious damage to your monitor.
Place your monitor in a location with low humidity and a minimum
of dust.
•  Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it.
•  This may cause damage to the product or the person carrying it.
Install the monitor base in a showcase or shelf so that the end of the
base does not protrude from the showcase or shelf.
•  Dropping the product may cause damage to the product or the person
carrying it.
Do not place the product on an unstable or small surface area.
•  Place the product on an even and stable surface, as the product may
fall and cause harm to someone walking by, specifically children.
2