Монитор PHILIPS 190E1SB. Инструкция на английском языке

F .BOVBM
Philips LCD Monitor Electronic User’s Manual
GJMF    '] NBOVBM TQFD     TQFD DE 2  (         "    &  DE 2  (         "          2  (         "          MDE NBOVBM &/(-*4)    &  */%&9 )5.

4BGFUZ BOE 5SPVCMFTIPPUJOH *OGPSNBUJPO
• Safety Precautions and Maintenance  Safety and Troubleshooting Information
•  FAQs
•  Troubleshooting          Safety precautions and maintenance
•  Regulatory Information
WARNING: Use of controls, adjustments or procedures other than
those specified in this documentation may result in exposure to shock,
electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Operation:
°     Keep the monitor out of direct sunlight and away from stoves or any other heat source.
°     Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
°     Do not block the ventilation holes on the cabinet.
°     When positioning the monitor, make sure the power plug and outlet are easily accessible.
°     If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching
the power cable or DC power cord for normal operation.
°     Please use approved power cord provided by Philips all the time. If your power cord is missing, please
contact with your local service center. (Please refer to Customer Care Consumer Information Center)
°     Do not subject the LCD monitor to severe vibration or high impact conditions during operation.
°     Do not knock or drop the monitor during operation or transportation.
Maintenance:
°     To protect your display from possible damage, do not put excessive pressure on the LCD panel. When
moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD
panel.
°     Unplug the monitor if you are not going to use it for an extensive period of time.
°     Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry
cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids
to clean your monitor.
°     To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or
excessive moisture environment.
°     If your monitor gets wet, wipe it with dry cloth as soon as possible.
°     If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the
power cord. Then, remove the foreign substance or water, and send it to the maintenance center.
°     Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold.
°     In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the
monitor in a location that falls within the following temperature and humidity ranges.
m     Temperature: 0-40°C 32-95°F
m     Humidity: 20-80% RH
GJMF    '] NBOVBM TQFD     TQFD DE 2  (         "    &  DE 2  (         "          2  (         "          MDE NBOVBM &/(-*4)    &  TBGFUZ TBGFUZ IUNc?  E  ?D

4BGFUZ BOE 5SPVCMFTIPPUJOH *OGPSNBUJPO
°     IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.
Always activate a periodic screen refresh application if your LCD monitor will display unchanging static
content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also
known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is
a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or
“ghost imaging” will disappear gradually over a period of time after the power has been switched off.
WARNING: Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear
and cannot be repaired. The damage mentioned above is not covered under your
warranty.
Service:
°     The casing cover should be opened only by qualified service personnel.
°     If there is any need for any document for repair or integration, please contact with your local service center.
(please refer to the chapter of "Consumer Information Center")
°     For transportation information, please refer to "Physical Specifications".
°     Do not leave your monitor in a car/trunk under direct sun light.
Consult a service technician if the monitor does not operate normally, or you are not sure what
procedure to take when the operating instructions given in this manual have been followed.
RETURN TO TOP OF THE PAGE
GJMF    '] NBOVBM TQFD     TQFD DE 2  (         "    &  DE 2  (         "          2  (         "          MDE NBOVBM &/(-*4)    &  TBGFUZ TBGFUZ IUNc?  E  ?D