ЖК-монитор LG LSM1850. Инструкция на русском языке

ENG:ENG  06-3-20  ??10:37  ? 1
User’s Guide
LSM1850
LSM2150
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.

ENG:ENG  06-3-20  ??10:37  ? 1
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however
improper use may result in potential electrical  shock or fire hazards. In order to allow the
proper operation of all safeguards incorporated in this display, observe the following basic rules
for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make
sure that it is certified by the applicable national standards if not being provided by the
supplier. If the power cable is faulty in any way, please contact the manufacturer or the
nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the socket-
outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this manual or
listed on the display. If you are not sure what type of power supply you have in your home,
consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and
broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects
on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time.
Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some
internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug it from the
wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal cable
because it can be very dangerous. It can cause electric shock.
1

ENG:ENG  06-3-20  ??10:37  ? 2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display
where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat
generated during operation. If these openings are blocked, built-up heat can cause failures
which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will
have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD
display. If used under any mode except the recommended resolution, some scaled or
processed images may appear on the screen. However, this is  characteristic of the fixed-
resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2