8-портовый управляемый коммутатор L2+ Metro Fast Ethernet с 2 портами Gigabit Ethernet совмещенными с SFP-слотами ZYXEL MES3500-10. Инструкция на английском языке

Ethernet Switch
CLI Reference Guide
Default Login Details
IP Address      http://192.168.0.1
(Out-of-band MGMT
port)
http://192.168.1.1
(In-band ports)
User Name               admin
Password                1234
Firmware Version 3.79, 3.80, 3.90
and 4.00
Edition 2, 08/2011
www.zyxel.com
www.zyxel.com
Copyright © 2011
ZyXEL Communications Corporation

About This CLI Reference Guide
About This CLI Reference Guide
Intended Audience
This manual is intended for people who want to configure ZyXEL Switches via Command
Line Interface (CLI).
The version number on the cover page refers to the latest firmware version supported by the
ZyXEL Switches. This guide applies to version 3.79, 3.80, 3.90 and 4.00 at the time of
writing.
?        This guide is intended as a command reference for a series of products.
Therefore many commands in this guide may not be available in your product.
See your User’s Guide for a list of supported features and details about feature
implementation.
Please refer to www.zyxel.com or your product’s CD for product specific User Guides and
product certifications.
How To Use This Guide
•Read the How to Access the CLI chapter for an overview of various ways you can get to
the command interface on your Switch.
• Use the Reference section in this guide for command syntax, description and examples.
Each chapter describes commands related to a feature.
• To find specific information in this guide, use the Contents Overview, the Index of
Commands, or search the PDF file. E-mail techwriters@zyxel.com.tw if you cannot find
the information you require.
Ethernet Switch CLI Reference Guide                                                          3

Document Conventions
Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this CLI Reference Guide.
? Warnings tell you about things that could harm you or your device. See your
User’s Guide for product specific warnings.
?        Notes tell you other important information (for example, other things you may
need to configure or helpful tips) or recommendations.
Syntax Conventions
This manual follows these general conventions:
• ZyXEL’s switches (such as the ES-2024A, ES-2108, GS-3012, and so on) may be referred
to as the “Switch”, the “device”, the “system” or the “product” in this Reference Guide.
• Units of measurement may denote the “metric” value or the “scientific” value. For
example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000”
or “1048576” and so on.
Command descriptions follow these conventions:
• Commands are in courier new font.
• Required input values are in angle brackets <>; for example, ping  means that you
must specify an IP address for this command.
• Optional fields are in square brackets []; for instance show logins [name], the name
field is optional.
The following is an example of a required field within an optional field: snmp-server
[contact ], the contact field is optional. However, if you
use contact, then you must provide the system contact information.
• Lists (such as ) consist of one or more elements separated by commas.
Each element might be a single value (1, 2, 3, ...) or a range of values (1-2, 3-5, ...)
separated by a dash.
•The | (bar) symbol means “or”.
• italic terms represent user-defined input values; for example, in snmp-server
[contact ], system contact can be replaced by the
administrator’s name.
• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER]
means the “Enter” or “Return” key on your keyboard.
4                                                            Ethernet Switch CLI Reference Guide