Модуль расширения с двумя слотами 10GBASE-CX4 ZYXEL EM-412. Инструкция на английском языке

EM-412
2-Slot 10GBase-CX4 10Gigabit Module
User’s Guide
Version 1.00
8/2008
Edition 1
Copyright © 2008. All rights reserved

EM-412 User’s Guide
Overview
The EM-412 is an uplink module with two slots for 10GBase-
CX4. It works up to a distance of 15 meters (49 feet) with the
advantage of having the lowest cost per port of all 10Gb
interconnects. It is designed for use with high-speed
switches, such as the XGS-4528F, XGS-4728F and the 10-
Gigabit Module (MI-7308) of MS-7206. After installing the EM-
412 in a switch, the switch can have 10 Gigabit connections
to a backbone switch or other network devices.
This guide helps you set up and use your EM-412.
This guide contains the following sections:
Section       Page Description
Hardware      3    How to install the EM-412 in a switch’s
Installation       expansion slot.
Cable         5    How to attach a 10GBase-CX4 cable to the
Connectivity       EM-412.
Troubleshooting  7  Some suggestions to solve problems you
might encounter.
Specifications  8  Information about your EM-412’s
specifications.
Safety Warnings  8  Using the EM-412 safely.
Related       9    Certifications, warranty and customer
Documentation      support information.
2

EM-412 User’s Guide
1 Hardware Installation
Follow these steps to install the EM-412 in a switch.
" Modules are NOT hot swappable!
1 Turn off your switch and unplug all power supply cords
(including any backup power supply cords) from the
switch.
2 Loosen the screws from the
cover plate and remove the
cover plate from an
expansion slot on the switch.
Do not discard the cover
plate. You can put the cover
plate back on if you remove
the new module.
" Before you continue, wear an anti-static wrist
strap or touch any grounded or metal objects to
discharge any bodily static electricity.
3 Remove the EM-412 from its protective anti-static
packaging. Hold the EM-412 by its edge to avoid touching
the onboard circuit components.
3