Беспроводной контроллер D-LINK DWC-1000. Инструкция на английском языке

Wireless Controller
User Manual
DWC-1000
Version 3.11
BUsiness Wireless solUtion

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes. Information in this document may become obsolete
as our services and websites develop and change.
Manual revisions
revision               Date                                       Description
3.10           October 16, 2014         DWC-1000 revision A1 with firmware 4.4.0.1
3.11            October 1, 2015         DWC-1000 revision A1/B1 with firmware 4.4.1.2
trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in
the United States or other countries. All other company or product names mentioned herein are trademarks or
registered trademarks of their respective companies.
© 2015 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written
permission from D-Link Corporation.
D-Link DWC-1000 User Manual                                                                                2

safety instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your system from
potential damage.
safety Cautions
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following
precautions:
•  Observe and follow service markings.
•  Do not service any product except as explained in your system documentation.
•  Opening or removing covers that are marked with the triangular symbol with a lightning bolt
may expose you to electrical shock.
•  Only a trained service technician should service components inside these compartments.
•  If any of the following conditions occur, unplug the product from the electrical outlet and replace the
part or contact your trained service provider:
•  The power cable, extension cable, or plug is damaged.
•  An object has fallen into the product.
•  The product has been exposed to water.
•  The product has been dropped or damaged.
•  The product does not operate correctly when you follow the operating instructions.
•  Keep your system away from radiators and heat sources. Also, do not block cooling vents.
•  Do not spill food or liquids on your system components, and never operate the product in a wet
environment. If the system gets wet, see the appropriate section in your troubleshooting guide or
contact your trained service provider.
•  Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by
shorting out interior components.
•  Use the product only with approved equipment.
•  Allow the product to cool before removing covers or touching internal components.
•  Operate the product only from the type of external power source indicated on the electrical ratings
label. If you are not sure of the type of power source required, consult your service provider or local
power company.
•  Also, be sure that attached devices are electrically rated to operate with the power available in your
location.
•  Use only approved power cable(s). If you have not been provided with a power cable for your system or
for any AC powered option intended for your system, purchase a power cable that is approved for use
in your country. The power cable must be rated for the product and for the voltage and current marked
on the product’s electrical ratings label. The voltage and current rating of the cable should be greater
than the ratings marked on the product.
•  To help prevent electric shock, plug the system and peripheral power cables into properly grounded
electrical outlets.
D-Link DWC-1000 User Manual                                                                                3