Модуль SNMP управления D-LINK DMC-1002. Инструкция на русском языке

DMC-1002
SNMP Module for
Chassis-Based Media Converter
Manual
Rev. 01 (JUN. 2002)
1907MCB10016000
RECYCLABLE

TABLE OF CONTENTS
ABOUT THIS GUIDE .................................................................. 2
FEATURES........................................................................................................2
UNPACKING.....................................................................................................2
CONFIGURING THE SYSTEM .......................................... 3
THE MEDIA CONVERTER CHASSIS SYSTEM ....................................................3
INSTALLING THE MANAGEMENT MODULE......................................................3
CONFIGURE THROUGH WEB BROWSER............................................................4
CONFIGURATION VIA SERIAL PORT.................................................................4
SUPPORT SNMP MANAGEMENT.....................................................................5
LED INDICATORS............................................................................................5
MANAGEMENT SETTING THROUGH WEB
BROWSER............................................................................................ 6
MANAGEMENT SETTING THROUGH
TERMINAL EMULATOR...................................................... 13
WHEN FORGOT THE PASSWORD.....................................................................19
TECHNICAL SPECIFICATIONS.................................... 20
1

ABOUT THIS GUIDE
This manual shows you how to configuring your DMC-1002 SNMP Module
for Chassis-Based Media Converter.
Features

    Compliant with IEEE802.3u 100BASE-TX standards

    Enable to monitor the module through terminal emulation program and
Web browser

    The network administrator can access management software by
connecting the management module either to a terminal emulation
program (through the RS232 interface) or to a remote network
management station (through the RJ45 interface and a hub)

    Status indication include:
1.   Identification of: Media Converter type; Slot number occupied
2.   Status Indication of Chassis: Redundant Power status; Power Fail status;
Fan Fail status
3.   Status Indication of Modules: Unit Power; Link/Activity; Transmit; Receive

    LED Indication: Power/Power Fail/Fan Fail/MGM/Console/Link/ACT

    Support Hot-swappable

    Auto-negotiation for half-duplex/full-duplex on TX ports

    Equipped with a 19” system chassis 16-converter with Redundant Power
supply for optional Expansion use.
Unpacking
Open  the  shipping  carton  of  the  SNMP  Module  and  carefully  unpack  its
contents.  The carton should contain the following items:
One DMC-1002 SNMP Module for Chassis-Based Media Converter
One RS232 cable
This Manual
If any item is found missing or damaged, please contact your local reseller for replacement.
2