Шасси коммутатора 3 уровня D-LINK DGS-6608. Инструкция на русском языке

-
DGS-6600 Series Switch CLI Reference Guide
Software Release 4.00.000
Date: November 14, 2013
Copyright Statement
D-Link Corporation © 2012
All rights reserved.
Without our written permission this document may not be excerpted, reproduced, transmitted, or
otherwise in all or part by any party by any means.
ii

-
Preface
Version Description
This manual’s command descriptions are based on the software release 4.00.000. The
commands listed here are the subset of commands that are supported by the DGS-6600
series switches.
Note: Other Ethernet L2/L3 Chassis-Based Switch series Hardware using similar software
may support a different subset of commands although generally the majority of the supported
commands and options will be similar.
Audience
This reference manual is intended for network administrators and other IT networking
professionals responsible for managing the DGS-6600 by using the D-LINK Command Line
Reference (CLI). The CLI is the primary management interface to the D-LINK DGS-6600
which will be generally referred to as the “switch” within this manual. This manual is written in
a way that assumes that you already have the experience and knowledge of Ethernet and
modern networking principles for Local Area Networks.
Document Organization
Preface                Describes how to use the CLI reference manual.
Feature Table of       A command list of the DGS-6604 commands grouped by their features and
Contents               linked to the command descriptions.
Command Listings       A complete list of available commands arranged in alphabetical order.
Acronyms               A glossary of acronyms used throughout the reference manual.
Other Documentation
The documents below are a further source of information in regards to configuring and troubleshooting the
switch. All the documents are available for download from D-Links web site www.d-link.com.
• DGS-6600 Series Quick Installation Guide
• DGS-6600 Series Hardware Installation Guide
iii

-
Conventions
Convention              Description
boldface font           Commands, command options and keywords are printed in boldface. Key words
in the command line, are to be entered exactly as they are displayed.
UPPERCASE ITALICS  Parameters or values that must be specified are printed in UPPERCASE
font                    ITALICS. Parameters in the command line, are to be replaced with the actual
values that are desired to be used with the command.
[     ]                 Square brackets enclose an optional value or set of optional arguments.
{ a | b| c}             Braces enclose alternative keywords separated by vertical bars. Generally, one
of the keywords in the separated list can be chosen.
[ a | b | c ]           Optional values or arguments are enclosed in square brackets and separated by
vertical bars. Generally, one of the vales or arguments in the separated list can
be chosen.
blue color screen Blue color screen fonts: are used it presents an example of a screen
console display including example entries of CLI command input with the
corresponding output.
Notes, Notices, and Cautions
Below are examples of the 3 types of indicators used in this manual. When administering your switch
using the information in this document, you should pay special attention to these indicators. Each
example below provides an explanatory remark regarding each type of indicator.
NOTE: A NOTE indicates important information that helps you make better use of your
device
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells
you how to avoid the problem
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
iv