Неуправляемый коммутатор с 16 портами 10/100BASE-TX и функцией энергосбережения D-LINK DES-1016A/C1. Инструкция на русском языке

16-Port 10/100MbPs UnManaged
desktoP switchwith
DES-1016A
Quick Installation Guide+
Руководство по быстрой установке+
Guia de Instalacion Rapida+
Guia de Instalacao Rapida+
??????+
Petunjuk Pemasangan Cepat+
?????????????+

ENGLISH        Quick Installation Guide
DES-1016A
16-Port 10/100 Mbps Fast Ethernet Switch
Check Your Package Contents
These are the items included with your DES-1016A purchase:
DES-1016A                Quick Installation Guide  DC Power Adapter
Note :
Using a power supply with a different voltage rating will
damage and void the warranty of this product.
Notice Before Setting Up the DES-1016A
The setup of the Switch can be performed using the following steps:
A. Install the DES-1016A in a fairly cool and dry place. See Technical Specification for the
acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
D. Visually inspect the DC power jack and make sure that it is fully secured to the power
adapter.
Do not stack any device on top of the Switch.
2                                                                         3

Connecting the DES-1016A 10/100 Mbps Fast Ethernet
Switch to Your Network                                             ENGLISH
DES-1016A
A. Power:
Power is supplied through an external DC power adapter. Check the technical
specification section for information about the DC power input voltage. Since the
DES-1016A does not include a power button, plugging its power adapter into a power
outlet will immediately power it on.
B. Fast Ethernet Ports:
These ports support network speeds of either 10 Mbps or 100 Mbps, and can operate
in half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX
crossover detection, which gives the Switch true, “plug and play” capabilities. Just
connect any network cable between the Switch and the device, and The Switch will
automatically detect the settings of the device and adjust itself accordingly.
LED Indicators
DES-1016A
DES-1016A
A. Power Indicator
This green indicator light is on when the Switch is receiving power; otherwise, it is off.
B. Link/Act
This LED indicator light is green when the port is connected to a device. The green
indicator blinks as data is transmitted or received.
2                                   3