Устройство bluetooth ACME BH05. Инструкция на русском языке

Model: BH05
bluetooth
headset
www.acme.eu

GB
Introduction
Thank you for purchasing the BH05.  Together with Bluetooth mobile phones and other
Bluetooth embedded devices. The Bluetooth headset BH05 allows you freedom to make and
receive calls while on the move or in the office. You can connect the headset to a compatible
phone that supports Bluetooth wireless technology.
Please read the user’s manual to make the best use of this headset and its many features.
Bluetooth wireless technology
Bluetooth  wireless  technology  makes  it possible  to  connect compatible  communication
devices without using cables. A Bluetooth connection does not require that the phone and
the headset be in line of sight, but both devices should be within 10 meters of each other.
Connections can be subject to interference from obstructions, such as walls or other electronic
devices.
The headset is compliant with Bluetooth Specification 2.1 supporting the following profiles:
Headset profiles 1.1 and Hands-Free Profiles 1.5 check with the manufactures of other devices
to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.
Get started
Overview
The headset contains the following parts as shown in the
figure:
(1)  Answer/end key.
(2)  Led Indicator
(3)  Volume up (r) and volume down (s) buttons
(4)  Microphone
(5)  Earphone
(6)  Charger socket
Before you can start using the headset, you must charge the
battery and pair the headset with a compatible phone.
Note: Parts of the headset are magnetic. Metallic materials
may be attracted to the headset. Do not place credit cards
or other magnetic storage media near the headset, because
information stored on them may be erased.
Charger and batteries
Check the model number of any charger before using it with this device.  The Bluetooth
headset is included for use with the chargers that is included in the package.
Charge the battery
This device has an internal, rechargeable battery. It connects the charger cable to the headset.
1.  Connect the charger to a wall outlet. The blue indicator light is displayed during charging.
2

GB
If charging does not start, disconnect the charger, plug it again, and retry. Charging the
battery fully may take up to 2 hours.
2.  When the battery is fully charged, the blue indicator light will turn off. Disconnect the
charger from the wall outlet and the headset.
When the battery is running out of power, the blue indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the Answer/end key for 4 seconds. The blue indicator light starts
to flash.
To switch off, press and hold the power key for 4 seconds until the blue indicator light is
displayed briefly.
Pair the headset with a compatible phone
1.  Make sure your headset is turned off
2.  Push the answer/end key for 7 seconds. The blue indicator light starts to flash.
3.  Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth
devices. See the user guide of your phone for instructions.
4.  Select the headset (BH05) from the list of found devices.
5.  Enter the password code 0000 to pair and connect the headset to your phone. In some
phones you may need to make the connection separately after pairing. See the user guide
of your phone for details. You only need to pair the headset with your phone once.
6.  If the pairing is successful, the headset’s blue light will flash 2 times briefly for the first time
follow by a single flash every 5 seconds. The headset’s name appears in the phone menu
where you can view the currently paired Bluetooth devices.
Multipoint function
•  In order to pair a second mobile phone, please press the volume down “s” button for 3
seconds, the LED will change rapidly, when it is steady Blue, the headset is ready for pairing
mode and you can pair the second mobile phone.
•  Turn off the headset and turn it on again, both mobiles are ready to be linked.
•  To activate the multipoint function, please press volume down “s” and volume up “r” at
the same time for 3 seconds, the headset will go into the multilink mode, the Blue LED will
show for 2 seconds.
•  Press the volume up “r” button for 1.5 seconds to switch the calling between the two
phones. A short press of the power key will end the call, and in the meantime will connect
to the hold phone (some phones will ask if you want to connect the phone or not), pressing
the power key again will end the call.
Redial
Double-press the answer/end button and you can hear a beeping sound from the headset.
Release the button and the headset will dial the last dialled telephone number.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the phone to another
Bluetooth device) do one of the following:
·   Switch off the headset.
3