Устройство bluetooth ACME BH03. Инструкция на русском языке

Model: BH03
bluetooth
headset
www.acme.eu

GB
Overview
The headset contains the following parts as shown   6
in the figure:
(1) Answer/end key.
(2) Led Indicator (red/blue)
(3) Microphone
(4) Earphone
(5) Charger socket
(6) Volume up (+) and volume down (-) buttons
Before you can start using the headset, you must
charge the battery and pair the headset with a
compatible phone.
Note: Parts of the headset are magnetic. Metallic materials may be attracted to the
headset. Do not place credit cards or other magnetic storage media near the headset,
because information stored on them may be erased.
Charge the battery
This device has an internal, rechargeable battery. It connects the charger cable to the
headset.
1.  Connect the charger to a wall outlet. The red indicator light is displayed during
charging. If charging does not start, disconnect the charger, plug it again, and retry.
Charging the battery fully may take up to 2 hours.
2.  When the battery is fully charged, the red indicator light will turn off. Disconnect the
charger from the wall outlet and the headset.
The fully charged battery has power for up to 4 hours of talk-time or up to 60 hours of
standby time. However, the talk and standby times may vary when used with different
mobile phones, products that use a Bluetooth connection, usage settings, usage styles,
and environments.
When the battery is running out of power, the red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the Answer/end key for 4 seconds. The blue indicator light
starts to flash.
To switch off, press and hold the power key for 4 seconds until the red indicator light is
displayed briefly.
2                                                                                             3

GB
Pair the headset with a compatible phone
1.  Make sure your headset is turned off
2.  Push the answer/end key for 6 seconds until the blue and red light flashes alternately
3.  Activate the Bluetooth  feature  on  the  phone,  and  set  the  phone  to  search  for
Bluetooth devices. See the user guide of your phone for instructions.
4.  Select the headset (BH03) from the list of found devices.
5.  Enter the password code 0000 to pair a-nd connect the headset to your phone. In
some phones you may need to make the connection separately after pairing. See
the user guide of your phone for details. You only need to pair the headset with your
phone once.
6.  If the pairing is successful, the headset’s blue light will flash 12 times briefly for the
first time follow by a single flash every 3 seconds. The headset’s name appears in the
phone menu where you can view the currently paired Bluetooth devices.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the phone to
another Bluetooth device) do one of the following:
·   Switch off the headset.
·   Disconnect the headset in the Bluetooth menu of your phone.
·   Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the connection in
the Bluetooth menu of your phone, or press and hold the Answer/end key.
You can set your phone to connect with the headset automatically when the headset is
switched on. See the user guide of your phone for details.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
·   Ensure that the headset is charged, switched on, paired with and connected to your
phone.
·   Ensure that the Bluetooth feature is activated on your phone.
·   Check that the headset is within 10 meter (30 feet) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.
2                                              3