Устройство bluetooth ACME BH02. Инструкция на русском языке

EN
IntroductIon
thank  you  for  purchasing  the  BH02.  together  with  Bluetooth  mobile  phones
and other Bluetooth embedded devices. the Bluetooth headset BH02 allows you
freedom to make and receive calls while on the move or in the office. You can
connect  the  headset  to  a  compatible  phone  that  supports  Bluetooth  wireless
technology.
Please read the user’s manual to make the best use of this headset and its many
features.
BluetootH wIreless tecHnologY
Bluetooth  wireless  technology  makes  it  possible  to  connect  compatible
communication devices without using cables. A Bluetooth connection does not
require that the phone and the headset be in line of sight, but both devices should
be within 10 meters of each other. connections can be subject to interference from
obstructions, such as walls or other electronic devices.
the  headset  is  compliant  with  Bluetooth  specification  2.0  supporting  the
following profiles: Headset profiles 1.1 and Hands-Free Profiles 1.5 check with the
manufactures of other devices to determine their compatibility with this device.
there may be restrictions on using Bluetooth technology in some locations. check
with your local authorities or service provider.
get stArted
overvIew
the headset contains the following parts as shown in the figure:
1.  Answer/end key.
2.  led Indicator (red/blue)
3.  volume up (?) and volume down
(?) buttons
4.  Microphone
5.  earphone
6.  charger socket
Before you can start using the headset,
you must charge the battery and pair
the headset with a compatible phone.
Note: Parts of the headset are magnetic.
Metallic  materials  may  be  attracted  to
the headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
cHArger And BAtterIes
check  the  model  number  of  any  charger  before  using  it  with  this  device. the
Bluetooth headset is intended for use with the chargers that is included in the
package.
2

EN
cHArge tHe BAtterY
this device has an internal, rechargeable battery. It connects the charger cable to
the headset.
1.  connect the charger to a wall outlet. the red indicator light is displayed during
charging. If charging does not start, disconnect the charger, pug it again, and
retry. charging the battery fully may take up to 2 hours.
2.  when  the  battery  is  fully  charged,  the  red  indicator  light  will  turn  blue.
disconnect the charger from the wall outlet and the headset.
the fully charged battery has power for up to 4 hours of talk-time or up to 200
hours of standby time. However, the talk and standby times may vary when used
with different mobile phones, products that use a Bluetooth connection, usage
settings, usage styles, and environments.
when the battery is running out of power, the red indicator light starts to flash.
swItcH tHe HeAdset on or oFF
to switch on, press and hold the Answer/end key for 3 seconds. the blue indicator
light starts to flash.
to switch off, press and hold the power key for 4 seconds until the red indicator
light is displayed briefly.
PAIr tHe HeAdset wItH A coMPAtIBle PHone
1.  Make sure your headset is turn off
2.  Push the answer/end key for 8 seconds until the blue and red light flashes
alternately
3.  Activate the Bluetooth feature on the phone, and set the phone to search for
Bluetooth devices. see the user guide of your phone for instructions.
4.  select the headset (BH02) from the list of found devices.
5.  enter the password code 0000 to pair and connect the headset to your phone.
In  some  phones  you  may  need  to  make  the  connection  separately  after
pairing. see the user guide of your phone for details. You only need to pair the
headset with your phone once.
6.  If the pairing is successful, the headset’s blue light will flash 3 times briefly
for the first time follow by a single flash every 7 seconds. the headset’s name
appears in the phone menu where you can view the currently paired Bluetooth
devices.
dIsconnect tHe HeAdset FroM tHe PHone
to disconnect the headset from your phone (for example, to connect the phone to
another Bluetooth device) do one of the following:
•  switch off the headset.
•  disconnect the headset in the Bluetooth menu of your phone.
•  Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
reconnect tHe PAIred HeAdset to Your PHone
to connect the headset to your phone, switch on the headset, make the connection
in the Bluetooth menu of your phone, or press and hold the Answer/end key.
You  can  set  your  phone  to  connect  with  the  headset  automatically  when  the
headset is switched on. see the user guide of your phone for details.
3

EN
trouBlesHootIng
If you cannot connect the headset to your phone, do as follows:
•  ensure that the headset is charged, switched on, paired with and connected to
your phone.
•  ensure that the Bluetooth feature is activated on your phone.
•  check that the headset is within 10 meter (30 feet) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.
BAsIc use
cAll HAndlIng
To Make a call
use your phone in the normal way when the headset is connected to your phone.
To aNswer a call
Press the Answer/end key, or use the phone keys. If the automatic answer function
is set on, the phone automatically answers the incoming call after one ring.
To eND a call
Press the answer/end key or use the phone keys.
redIAl tHe lAst dIAled nuMBer
Press and hold volume up (?) key for 3 second to redial the last dialed number (if
your phone supports redialing with this device).
voIce dIAlIng (dIAlIng A nuMBer BY sAYIng A nAMe)
It is possible to make a call directly from the headset using voice recognition. to
use this voice dialing function, your mobile phone must provide this option and
corresponding voice samples must have been recorded.
Step-1
Press the Answer/end button of the headset one time, you will hear a beep prompt.
Step-2
when you hear a short tone, say the name of the person you wish to call loudly.
Adjust tHe eArPHone voluMe
VoluMe uP
while in conversation, press the volume up (?) button to increase the volume.
VoluMe DowN
while in conversation, press the volume down (?) button to decrease the volume.
Adjust tHe MIcroPHone voluMe
If you want to mute the microphone, press and hold volume down (?) button for
3 second till you hear a beep. release the button and the microphone is muted.
when microphone is muted you hear sort beep signals from BH02 earphone. If you
want to unmeet the microphone, press and hold volume down (?) for 3 second
again till you hear a beep.
swItcH tHe cAll Between PHone And HeAdset
during a conversation, press and hold the Answer/end button for 3 seconds, the
BH02 will be switched off and the call will be transferred to your mobile phone. If
4