Компьютерная мышь GIGABYTE M7600. Инструкция на английском языке

All specifications and figures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

Introduction
Congratulations on your purchase of the most innovative wireless  mouse. With an                                                  2 * AAA batteries
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.                       Battery compartment cover            +
-
Features
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.                                                                                                       A wrong battery placement
Auto-Link, Plug and Play! No need to set the channel ID.                                                                   may cause batteries overheat.
Power on/off switch.
Ergonomic design.
800/1600 dpi switchable button.                                                       The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
Rubber side grips and finger grooves.                                                 button of the mouse" is compulsory to wake it up.
Power on/off:
2*AAA Alkaline batteries included.                                                    There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution.  The LED on wheel bar will be flashed when dpi has been
sucessfully swithced.
Mouse
2. Connect the receiver
Wheel button
a. Turn on your PC.
Dpi button                  Receiver    Receiver                     b. Connect the receivere to USB port on PC
Low power indicator                                                                                      Press the receiver
release button
Battery cover            ID reset button
Power on/off switch
Receiver release
button
A. Hardware Installation                                                                       PC    USB port
1. Insert the batteries
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.  3. Communication : The mouse & the receiver
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.                The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
e. The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.   mouse and the receiver auto-communication.

A. Auto-link mode                                                                    ? Battery use reminders
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the       1. Remove worn-out batteries from equipment immediately and dispose of promptly.
mouse and the receiver is auto-linked successfully.                              2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time.  Mixing old and new batteries or mining types (such as alkaline with
zinc carbon) will reduce overall performance and could cause leakage or rupture.
B. Manual mode                                                                       6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.
If you find the communication channel does not connect well, you can use the software   7. Remove batteries from the electrical device if the device is not going to be used for a long time.
8. If the performance of the batteries decreases substantially, it is time to replace the batteries.
connection tool to re-connect the mouse & receiver to reset a new channel ID. Please
download driver at www.gigabyte.com.tw/Products/Mouse/Default.aspx
1                                   2                  3                             FCC statement
ID links OK!                  This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Execute ID connection software                                                    This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
Press ID reset button                         communications. However, there is no guarantee that interference will not occur in a particular
installation if this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
Note                                                                              correct the interference by one of the following measures:
While the mouse is working, if encountering any interference, the mouse and the receiver will   µ?Reorient or relocate the receiving antenna.
automatically  source  out  and  transfer  to  another  free  channel.    During  the  transferring,  the   µ?Increase the separation between the equipment and receiver.
cursor movement may have a second delay.
µ?Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
To assure continued compliance, any changes or modifications not expressly approved by the
4. Replace the new batteries                                                         party responsible for compliance could void the user's authority to operate this equipment.
(Example-use only shielded interface cables when connecting to computer or peripheral
Please replace a pair of new batteries and follow the previous instructions. (2, 3)  devices).
Note                                                                              FCC Radiation Exposure Statement
The red LED on the scroll wheel is the low batteries power indicator.  It indicates that
batteries inside the mouse are needed to be replaced.
This equipment complies with FCC RF radiation exposure limits sent forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
? Trouble Shooting                                                                    This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference. and
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the   (2) This device must accept any interference received, including interference that may
computer, the computer monitor or external storage drives.                        cause undesired operation.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The
mouse and the receiver
d. If you find the communication channel does not connect well.  You can use the software connection tool to re-connect   The antennas used for this transmitter must be installed to provide a separation distance of at
the mouse & receiver to reset a new channel ID.  You are able to get the software from the included diskette of the   least 20cm from all persons and must not be co-located or operation in conjunction with any
package or download from your local brand vendor's website.
e. Some system devices might conflict with the mouse.  Confirm the IRQ/address settings of these devices for conflicts,   other antenna or transmitter.
and change the settings as required.
f.  Make sure that you are not working the mouse on glossy or reflective surfaces.